Dicas Reparação HITACHI
Modelo - Chassis
Pesquisa: HITACHI Enviar Dica Resolvida
Resultados 1003
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Hitachi | NP83CQ | dead | won't work on dummy load unless loptx removed - loptx faulty | ||
| Hitachi | NP83CQ | dead | 2A fuse blackened, STR6020 s/c, Loptx s/c windings, 2 x 1R safety re o/c (no 12v or 30v) & TDA3651 field chip u/s | ||
| Hitachi | NP83CQ | Channels - no channel change & no raster. | Q1454 ( cita Pcb ) | ||
| Hitachi | NP83CQ | Bright on LH side of raster | C715 2µ2 250v o/c | ||
| Hitachi | NP83CGMk2 | Pic pulls to right & int field roll | Try s/c vid in & out conns on txt pcb - if ok fault on txt pcb | ||
| Hitachi | NP83 | Standby - stuck in standby mode. | R1437 ( 820R ) o/c change to 1w type. | ||
| Hitachi | NP83 | No sound. | R462 ( 22R ) o/c. | ||
| Hitachi | NP83 | FIELD COLLAPSE FIELD SQUARE WAVE PRESENT AT PIN 4 | C610 220uF 50v | ||
| Hitachi | NP83 | Channels - no channel change & blank raster. | Q1454 ( cita Pcb ) | ||
| Hitachi | NP82CQ2 | Standby - int going into standby. | IC901 ( STR6020 ) | ||
| Hitachi | NP82CQ/2 | Whistle - loud whistle & ragged verticals. | IC701 ( LA7801 ) | ||
| Hitachi | NP82CQ/2 | Tripping. | IC701 , IC681 , Q681 , IC901. | ||
| Hitachi | NP82CQ/2 | Standby - going into standby. | IC901 ( STR6020 ) | ||
| Hitachi | NP82CQ/2 | Sparking inside set. | R902/3 ( 82k , 0.5w ) , IC701 ( LA7801 ) , IC901 ( STR6020 | ||
| Hitachi | NP82CQ/2 | Ragged verticals & loud whistle. | IC701 ( LA7801 ) |