Dicas Reparação PANASONIC
Modelo - Chassis
Pesquisa: PANASONIC Enviar Dica Resolvida
Resultados 2642
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Panasonic | Euro 7 TX-68P200A | FAULTY SOUND | Q2002 | ||
| Panasonic | Euro 7 TX-68P200A | faulty colour on rgb | IC1315 | ||
| Panasonic | Euro 7 TX-68P200A | FAILED TINT | Q1340 | ||
| Panasonic | Euro 7 TX-68P200A | FAILED SUB COLOUR | C1477 | ||
| Panasonic | Euro 7 TX-68P200A | failed sub bright,pink picture | IC1315, D010 | ||
| Panasonic | Euro 7 TX-68P200A | FAILED AFT | TNR001 | ||
| Panasonic | Euro 7 TX-68P200A | DEAD | D20, R874 | ||
| Panasonic | Euro 7 TX-68P200A | BRIGHT PICTURE | D354 | ||
| Panasonic | Euro 7 TX-68P200A | BLUE PIX TELETEXT | IC1315 | ||
| Panasonic | Euro 7 TX-68P200A | AV PICTURE SHIFTED TO LEFT | IC1104 | ||
| Panasonic | Euro 7 TX32PG30 | St/by only | Reset line volts going into U1 pcb stuck halfway - being loaded by faulty sm filter LC1118 in reset line | ||
| Panasonic | Euro 7 TX28MDMk1C/M | White raster , no OSD - sometimes G with FB Lines - very int | Replaced micro SDA5450C48 (34 UKP) | ||
| Panasonic | Euro 5L TX36PF10 | Tries to start up but shuts down into standby within seconds of pressing the power switch. | Replace the 2SC2925STA line driver transistor (Q502) which had an open circuit b-e junction and also replace the X24C0501UA EAROM chip (IC1102) which had become corrupted. | ||
| Panasonic | Euro 5 TX33PF10 | Sound but no pic | Perform 'self check' by pressing "-/V" button on set & "status" button on handset together. To exit switch off with power button | ||
| Panasonic | Euro 5 TX33PF10 | Low unadjustable sound on AV | Perform 'self check' by pressing "-/V" button on set & "status" button on handset together. To exit switch off with power button |