Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Philips | FL1.1S | Total inoperative, leds blinking, error 99 | Check and replace if necessary C2504 and/or 2505 (2kV HRR) on the Large signal panel. Replace by a 3kV15 HR-R capacitor if possible: 820pF 4822 126 13152 1nF 4822 126 13153 1,2nF 4822 126 13154 1,5nF 4822 126 13155 1,8nF 4822 126 13156 2, | ||
Philips | FL1.1S | Ticking noise and line in picture | Transistor 7381 (BC848C; 5322 130 42136) defective when hot. | ||
Philips | FL1.1S | Synchronization, picture disappears | D6703 and T7704 defective on picture tube panel. | ||
Philips | FL1.1S | Spook in picture | Use special antenna cables. Codenumbers: 4822 321 61224 PAL 1 meter 4822 321 61225 PAL 2 meter 4822 321 61226 SECAM 1 meter 4822 321 61227 SECAM 2 meter | ||
Philips | FL1.1S | Spare parts remote control RC64xx | Spare parts remote control RC64xx --------------------------------- Codenumbers for part of the RC64xx remote control: Flap right 4822 432 92716 Flap left 4822 432 92715 Battery lid (cover) 4822 432 92714 | ||
Philips | FL1.1S | Production mofification of line transistor circuit | Production mofification of line transistor circuit -------------------------------------------------- Production changed over to a single line transistor. The following items have been changed: - item 3504 changed into 3,3 Ohm 1W (4822 053 10338) - item 3 | ||
Philips | FL1.1S | PIP picture not in order. | Check R3345 (4822 111 41424) in PIP unit, check IC7755 (4822 209 63423). | ||
Philips | FL1.1S | Picture twists from top | Voltage of pin 8-IC7450 (TDA3654Q) on the LSP has raised to ca. 20 V. Check diode 6451 (BZX79/C5V6; 4822 130 80954). | ||
Philips | FL1.1S | Picture twists from top | Voltage of pin 8-IC7450 (TDA3654Q) on the LSP has raised to ca. 20 V. Check diode 6451 (BZX79/C3V6; 5322 130 34834 or BZX79/C10; 4822 130 61219) | ||
Philips | FL1.1S | Picture often dark | Check IC7201 in High End-box (SAA9042P/A; 4822 209 31851) | ||
Philips | FL1.1S | Picture disappears shortly after 30" or control does not function. | When hot, 13,5 MHz clock stops working; change the value of R3123 to 1k2. | ||
Philips | FL1.1S | Picture disappears (fly back lines), ON STEREO and DUAL LEDs blink | Check IC7430 (TDA4680). When TDA4680 is too hot there is no picture (4822 209 31592). | ||
Philips | FL1.1S | Overview of SOPS repair kits | Overview of SOPS repair kits ---------------------------- FL1.0 AG00 upto AG03 4822 310 20492 FL1.0 AG04 and higher 4822 310 31921 FL1.0S 4822 310 31924 FL1.1 25" and 28" 4822 310 31919 FL1.1 33" 4822 310 31932 FL1.1S | ||
Philips | FL1.1S | No sound, "ON, Standby, I" LEDs blinking | 10MHz crystal 1602 on the SSP defective, 4822 242 80276 | ||
Philips | FL1.1S | No colors in TV mode | Check IC7365 (TDA4650) on the SSP (4822 209 30837) |