| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Philips | FL1.17 | Protection activated due to no +5V from LOT. | Check IC7551, LM 358N (4822 209 71825). If IC7551 has to be replaced, it is recommended: 1) for production code AG00-09 add diode BZX79-C18 (4822 130 31024) between 9240 and pin 8 of position 7551, with cathode to pin 8 of IC7551. 2) for production | ||
| Philips | FL1.17 | PIP picture not in order. | Check R3345 (4822 111 41424) in PIP unit, check IC7755 (4822 209 63423). | ||
| Philips | FL1.17 | Picture twists from top | Voltage of pin 8-IC7450 (TDA3654Q) on the LSP has raised to ca. 20 V. Check diode 6451 (BZX79/C5V6; 4822 130 80954). | ||
| Philips | FL1.17 | Picture twists from top | Voltage of pin 8-IC7450 (TDA3654Q) on the LSP has raised to ca. 20 V. Check diode 6451 (BZX79/C3V6; 5322 130 34834 or BZX79/C10; 4822 130 61219) | ||
| Philips | FL1.17 | Picture often dark | Check IC7201 in High End-box (SAA9042P/A; 4822 209 31851) | ||
| Philips | FL1.17 | Picture disappears shortly after 30" or control does not function. | When hot, 13,5 MHz clock stops working; change the value of R3123 to 1k2. | ||
| Philips | FL1.17 | Picture disappears (fly back lines), ON STEREO and DUAL LEDs blink | Check IC7430 (TDA4680). When TDA4680 is too hot there is no picture (4822 209 31592). | ||
| Philips | FL1.17 | Overview of SOPS repair kits | Overview of SOPS repair kits ---------------------------- FL1.0 AG00 upto AG03 4822 310 20492 FL1.0 AG04 and higher 4822 310 31921 FL1.1 25" and 28" 4822 310 31919 FL1.1 33" 4822 310 31932 FL1.2 4822 310 31932 FL1.6 | ||
| Philips | FL1.17 | Only white and black lines. OSD and TXT OK. Error 05. | Check IC7231 (SDA9205-2; 4822 209 31056) on ECO-box. | ||
| Philips | FL1.17 | Only red LED is on. Hardware protection. | Check E/W protection T7540, T7541 (BC547C; 5322 130 42755) and T7542 (BC857C; 5322 130 42756). | ||
| Philips | FL1.17 | Only noisy green picture. Sound and TXT OK. | Check IC7231 (SDA9205-2 noric; 4822 209 31056). | ||
| Philips | FL1.17 | Only horizontal white and black lines. TXT and sound OK. | Check memory IC IC7240 100Hz eco-box (4822 209 52418). | ||
| Philips | FL1.17 | Only for Classic Line Correction of Product Survey | Only for Classic Line Correction of Product Survey 1993-3 ----------------------------------- The stocklist of styling 31 in Product Survey 1993-3 (4822 727 20046) does not correspond with the exploded view. This is corrected in Product Survey 1993-4 (4 | ||
| Philips | FL1.17 | Noisy green picture. No B-Y signal. | Check IC7245 (SAA4970T/V1; 4822 209 32581) on ECO-box. | ||
| Philips | FL1.17 | Noise on high volume | Perform the following modifications on the SSP: Add on position 3618 4,7nF (4822 122 31784) Add on position 3619 jumper (4822 051 10008) Connected in series from 2604/4610 to earth. Change position 4610 into 1k ohm (4822 051 10102) |