Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Philips | FL1.17 | East/West failure in cold condition. | Replace C2611 by 1uF (4822 121 51319) on LSP. REMARKS : Introduced in production in week 9332. | ||
Philips | FL1.17 | Dark picture, only green led, no menu or OSD. | +5V supply was 4,1V. Voltage D6551 was 4,3V instead of 5,6V. Check/replace D6551 (4822 130 80954). | ||
Philips | FL1.17 | Crazy behaviour: No response from RC or controls. | Other phenomenas: volume up/down, spontanuous service mode etc. etc. in areas with TOP-teletext. Replace control software by replacing EPROM IC7002 to version V83 (4822 900 10506). For easy mounting also the controlboard 7115 (on SSP) can be replaced by | ||
Philips | FL1.17 | Crazy behaviour: No response from RC or controls. | Other phenomenas: volume up/down, spontanuous service mode etc. etc. in areas with TOP-teletext. Replace control software by replacing EPROM IC7002 to version V83 (4822 900 10506). For easy mounting also the controlboard 7115 (on SSP) can be replaced by | ||
Philips | FL1.17 | Crazy behaviour: No response from RC or controls. | Other phenomenas: volume up/down, spontanuous service mode etc. etc. in areas with TOP-teletext. Replace control software by replacing EPROM IC7002 to version V82 (4822 900 10423). For easy mounting also the controlboard 7115 (on SSP) can be replaced by | ||
Philips | FL1.17 | Correction to the Service Manual | Correction to the Service Manual -------------------------------- In circuit diagram B on page 7 of the service manual FL1.14/FL2.14/FL1.16/FL2.16 and FL 1.17 the resistors 3624 and 3625 are not drawn. These resistors should be drawn on the position of 96 | ||
Philips | FL1.17 | Correction to service manual FLx.14/16/17 | Correction to service manual FLx.14/16/17 and FLx.24/26/27. ----------------------------------------------------------- The code number of position 1200 (fuse 3,15 A) is wrong. The correct code number is 4822 070 33152. This fuse is situated on the LSP i | ||
Philips | FL1.17 | Correction to Service Manual | Correction to Service Manual ---------------------------- In service manual FL1/2.14, FL1/2.16, FL1.17 AA the code number of the Scavem amplifier panel is wrong. The correct code number for this panel is 4822 212 31469. REMARKS : The code number | ||
Philips | FL1.17 | Correction to service information FL 95.01 | Correction to service information FL 95.01 ------------------------------------------ Correction in the overview of 100Hz and Proscan boxen. The replacement for service code 4822 212 30534 must be 4822 212 31231 The replacement for service code 4822 21 | ||
Philips | FL1.17 | Correction to Product Survey 1996-4 | Correction to Product Survey 1996-4 (4822 727 21505) ---------------------------------------------------- On page PCS 41989 is mentioned at: FL1.10 AG11 and higher: Control panel 4822 212 31708 FL1.17 AG20 : Control panel 4822 212 31708 FL | ||
Philips | FL1.17 | Colour loss at photofinish and scan. | Change position 6003 on the ECO-box into a LL4148 (4822 130 80446). REMARKS : Introduced in production in week 9424. | ||
Philips | FL1.17 | Colored picture or picture is green/red, fly-back lines | Check zenerdiode 6450 on pin 19-IC7430 on the LSP. New diode must be Philips (Telefunken does not work), 4822 130 81512 | ||
Philips | FL1.17 | BUX85F in mikroSOPS defective | Change the value of C2260 to 4n7F, replace 7270 with transistor BD825 (4822 130 41746). | ||
Philips | FL1.17 | Both languages can be heard by Dual Nicam signals | For FL1-PTV change the software into V89; 4822 900 10732 For all other FL sets change the software into V88; 4822 900 10723 REMARKS :Introduced in production from week 9614 onwards. | ||
Philips | FL1.17 | Blank picture. OSD not synchronised and too large, no TXT. | Check/replace memory IC 7900 (ST24C08CB1; 4822 209 32283). |