| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Philips | FL1.14 | Jitter | In PIP unit change the value of R3336 to 4k7. | ||
| Philips | FL1.14 | How to enable/disable "Child Lock" | Press "MENU" button on Remote Control. When the menu appears on the screen, you select "SPECIAL FEATURES" (this expression is language dependent) Within "SPECIAL FEATURES", the "CHILD LOCK" can be enabled or disabled. | ||
| Philips | FL1.14 | Four dark bars over the picture. | The +5 volt was 5.6 volt instead of 5.1 volt. Check/replace IC7551 (4822 209 70672). | ||
| Philips | FL1.14 | Extension frequency range SATELLITE reception | Extension frequency range SATELLITE reception --------------------------------------------- Only for sets with SAT box: In the present FL sets with a SAT box the frequency range is: with SF914 tuner 950 - 1750 MHz with SF916 tuner 950 - 2000 MHz (optio | ||
| Philips | FL1.14 | Deflection unstable when switching from panorama to wide screen. | The following items on the DAF panel change: - C2860 changed into 470pF 2kV (4822 126 12267) - C2861 changed into 560pF 2kV (4822 126 12239) - R3301 and R3302 changed into VDR (4822 116 21221) REMARKS : Introduced in production from wee | ||
| Philips | FL1.14 | Deflection unstable when switching from panorama to wide screen. | The following items on the DAF panel change: - C2860 changed into 470pF 2kV (4822 126 12267) - C2861 changed into 560pF 2kV (4822 126 12239) - R3301 and R3302 changed into VDR (4822 116 21221) REMARKS : Introduced in production from wee | ||
| Philips | FL1.14 | Dark picture, only green led, no menu or OSD. | +5V supply was 4,1V. Voltage D6551 was 4,3V instead of 5,6V. Check/replace D6551 (4822 130 80954). | ||
| Philips | FL1.14 | Crazy behaviour: No response from RC or controls. | Other phenomenas: volume up/down, spontanuous service mode etc. etc. in areas with TOP-teletext. Replace control software by replacing EPROM IC7002 to version V82 (4822 900 10423). For easy mounting also the controlboard 7115 (on SSP) can be replaced by | ||
| Philips | FL1.14 | Correction to service manual FLx.14/16/17 | Correction to service manual FLx.14/16/17 and FLx.24/26/27. ----------------------------------------------------------- The code number of position 1200 (fuse 3,15 A) is wrong. The correct code number is 4822 070 33152. This fuse is situated on the LSP i | ||
| Philips | FL1.14 | Correction to Service Manual | Correction to Service Manual ---------------------------- In service manual FL1/2.14, FL1/2.16, FL1.17 AA the code number of the Scavem amplifier panel is wrong. The correct code number for this panel is 4822 212 31469. REMARKS : The code number | ||
| Philips | FL1.14 | Correction to service information FL 95.01 | Correction to service information FL 95.01 ------------------------------------------ Correction in the overview of 100Hz and Proscan boxen. The replacement for service code 4822 212 30534 must be 4822 212 31231 The replacement for service code 4822 21 | ||
| Philips | FL1.14 | Correction of diagram M` of Service manual | Correction of diagram M` of Service manual ------------------------------------------ The diagram/partslist of the LFR (digital scan) box shows IC7244 typenumber N74F74D. However on this position an IC with typenumber N74F125D (5322 209 61857) is used. | ||
| Philips | FL1.14 | Correction | Correction ---------- The code number of the LFR (digital scan) box FL1.14 36" mentioned in the Service Manual, Chassis FL1.14, FL2.14, FL1.16, FL2.16 and FL1.17, is not correct. Instead of 4822 212 30587 it should be 4822 212 30857. Chassis manual: GB | ||
| Philips | FL1.14 | Colored picture or picture is green/red, fly-back lines | Check zenerdiode 6450 on pin 19-IC7430 on the LSP. New diode must be Philips (Telefunken does not work), 4822 130 81512 | ||
| Philips | FL1.14 | BUX85F in mikroSOPS defective | Change the value of C2260 to 4n7F, replace 7270 with transistor BD825 (4822 130 41746). |