Dicas Reparação PHILIPS





Pesquisa: PHILIPS

Resultados 13482

MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
PhilipsFL1.1Violet back colorChange the values of R3163 (470 Ohm) and R3165 (470 Ohm) to 1kOhm in High End Box.
PhilipsFL1.1Vertical deflection in lower part picture disturbed.Check/replace vertical amplifier IC7450 on LSP (4822 209 73308).
PhilipsFL1.1Vertical deflection in lower part picture disturbed.Check/replace vertical amplifier IC7450 on LSP (4822 209 73308).
PhilipsFL1.1Unstable picture, horizontal jitter.Check/replace R3405 on the LSP. (4822 051 10303 for 50 Hz sets; 4822 051 10333 for 100 Hz sets).
PhilipsFL1.1Txt does not work, linesDiode 6200 in High-End-Box defective.
PhilipsFL1.1Txt does not work from time to timePin 8-IC7201 poorly soldered. IC7201 (SAA9042) defective.
PhilipsFL1.1Tuning does not functionResistor R3240 on LSP in V-tuning wire broken.
PhilipsFL1.1Totally inoperative.Transistors 7250 (BUX85F; 4822 130 62509) and 7251 (BC848; 4822 130 61207) in microSOPS defective. Or D6251 (LLZ-C5V6; 4822 130 80954) and R1250 (=R3230; 1 Ohm; 4822 052 10108) defective. Or T7270 (BD825; 4822 130 41746) Or T7201 (BC857C; 5322 130 427
PhilipsFL1.1Total inoperative, leds blinking, error 99Check and replace if necessary C2504 and/or 2505 (2kV HRR) on the Large signal panel. Replace by a 3kV15 HR-R capacitor if possible: 820pF 4822 126 13152 1nF 4822 126 13153 1,2nF 4822 126 13154 1,5nF 4822 126 13155 1,8nF 4822 126 13156 2,
PhilipsFL1.1Ticking noise and line in pictureTransistor 7381 (BC848C; 5322 130 42136) defective when hot.
PhilipsFL1.1The +141 is about 110V instead of 141VIt is recommended to replace the SOPS PWB (4822 212 23749).
PhilipsFL1.1Synchronization, picture disappearsD6703 and T7704 defective on picture tube panel.
PhilipsFL1.1Synchronization fault, "temperature drift"Change the value of R3132 (1k5) to 1k2 in High End Box.
PhilipsFL1.1STUCK IN STBY SWITCHED FROM REMOTE LIGHTS FLASHC2504 USUALLY 1nF 2kv
PhilipsFL1.1Stuck in prot modeC2504 2n2 2kv, line shift trs 7512 & 7513



Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads