| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Philips | FL1.0S | PIP picture not in order. | Check R3345 (4822 111 41424) in PIP unit, check IC7755 (4822 209 63423). | ||
| Philips | FL1.0S | Picture twists from top | Voltage of pin 8-IC7450 (TDA3654Q) on the LSP has raised to ca. 20 V. Check diode 6451 (BZX79/C3V6; 5322 130 34834 or BZX79/C10; 4822 130 61219) | ||
| Philips | FL1.0S | Picture twists from top | Voltage of pin 8-IC7450 (TDA3654Q) on the LSP has raised to ca. 20 V. Check diode 6451 (BZX79/C5V6; 4822 130 80954). | ||
| Philips | FL1.0S | Picture twists from top | Voltage of pin 8-IC7450 (TDA3654Q) on the LSP has raised to ca. 20 V. Check diode 6451 (BZX79/C3V6; 5322 130 34834 or BZX79/C10; 4822 130 61219) | ||
| Philips | FL1.0S | Picture often dark | Check IC7201 in High End-box (SAA9042P/A; 4822 209 31851) | ||
| Philips | FL1.0S | Picture disappears shortly after 30" or control does not function. | When hot, 13,5 MHz clock stops working; change the value of R3123 to 1k2. | ||
| Philips | FL1.0S | Picture disappears (fly back lines), ON STEREO and DUAL LEDs blink | Check IC7430 (TDA4680). When TDA4680 is too hot there is no picture (4822 209 31592). | ||
| Philips | FL1.0S | Overview of SOPS repair kits | Overview of SOPS repair kits ---------------------------- FL1.0 AG00 upto AG03 4822 310 20492 FL1.0 AG04 and higher 4822 310 31921 FL1.0S 4822 310 31924 FL1.1 25" and 28" 4822 310 31919 FL1.1 33" 4822 310 31932 FL1.1S | ||
| Philips | FL1.0S | Noise PIP picture | Change the following items on the PIP module 4822 212 30303: - item C2020 added 10 uF 50V (4822 124 40435) soldered with + to item 9031 and with - to item 9024 - item R3403 changed into 150 ohm (4822 051 10151) - item R3410 changed into 130 ohm (4822 0 | ||
| Philips | FL1.0S | No sound, "ON, Standby, I" LEDs blinking | 10MHz crystal 1602 on the SSP defective, 4822 242 80276 | ||
| Philips | FL1.0S | No colors in TV mode | Check IC7365 (TDA4650) on the SSP (4822 209 30837) | ||
| Philips | FL1.0S | Modification TDA4680/V4 -> TDA4681/V1 on the SSP | Modification TDA4680/V4 -> TDA4681/V1 on the SSP ------------------------------------------------ During production IC7430 TDA4680/V4 has been changed into the TDA4681/V1 (4822 209 32271). Together with the IC also some other components must change: - ite | ||
| Philips | FL1.0S | Modification improved bandpass for high frequency | Modification improved bandpass for high frequency in -/61 sets -------------------------------------------------------------- On the Korean stereo panel the following items are changed: - item C2080 added 10nF 50V (4822 121 41857) - item C2083 changed int | ||
| Philips | FL1.0S | Low frequency hum from subwoofer, buzz from right hand squeeter. | Check DC level on pin 1 and 9 of IC7011 (TDA1521). If not correct, replace (4822 209 63913). | ||
| Philips | FL1.0S | Low Brightness TXT and OSD, Picture OK | If this condition occurs, check the Option Codes. Resetting the Option Code numbers as per the Service Manual provided the cure. |