Dicas Reparação PHILIPS





Pesquisa: PHILIPS

Resultados 13482

MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
PhilipsFL1.0Auto switch-off with audio only inputWith early receivers, if an audio signal only is applied to an external socket without an accompanying video signal, the set will switch to standby after about 10 minutes. The absence of a video signal is interpreted as a no signal condition and an audio
PhilipsFL1.0At times horizontal stripes in the upper part of the picture.Check C2450 on the LSP vertical frame port (10nF; 4822 122 32442).
PhilipsFL1.0At times horizontal stripes in the upper part of the picture.Check C2450 on the LSP vertical frame port (10nF; 4822 122 32442).
PhilipsFL1.0Alternatives for A59EAK252X13 and A66EAK252X13Alternatives for A59EAK252X13 and A66EAK252X13 ---------------------------------------------- The following Blackline S picture tubes will no longer be supplied: 25" A59EAK252X13 4822 131 20521 28" A66EAK252X13 4822 131 20472 These have been replaced
PhilipsFL1.0Alternatives for A51EAK02X03 and A80EBK221X01Alternatives for A51EAK02X03 and A80EBK221X01 --------------------------------------------- The following Blackline S picture tubes will no longer be supplied: 21" A51EAK02X03 4822 131 20538 33" A80EBK221X03 4822 131 20376 These have been replaced by
PhilipsFL1.0After about 10 minutes: red or blue picture, flyback linesCheck D6450 on the SSP, at pin 19 of TDA460 video controller IC (LLZ-C6V2; 4822 130 81512).
PhilipsFL1.0After about 10 minutes: red or blue picture, flyback linesCheck D6450 on the SSP, at pin 19 of TDA460 video controller IC (LLZ-C6V2; 4822 130 81512).
PhilipsFL1.0After a while dark picture.Check T7451 (BC847C; 5322 130 42755).
PhilipsFL1.0After 1 hour E/W and minimum width failure.Transistor T7608 (BC547C) on LSP interrupted when hot. (4822 130 44503)
PhilipsFL1.050Hz buzz noticable through speakerCheck/replace IC7680 on the SSP - TDA8425, pseudo stereo IC. (4822 209 63734).
PhilipsFL1.022AV1440 is switched on by external VCR when FL1 is switched offConnect 4 diodes of type BAT 85 to inputs of IC7630 on SSP. 1 diode between pin 3/IC7630 and +5V, cathode to +5V. 1 diode between pin 5/IC7630 and +5V, cathode to +5V. 1 diode between pin 3/IC7630 and -8V, anode to -8V. 1 diode between pin 5/IC7630 and -8
PhilipsFL1no off air sound SCART I/p sound okcheck sound o/p from tuner - if missing TDA3856 in module sus
PhilipsE2Width - reduced & ripple.R306 ( 22k ) high.
PhilipsE2Sound - distorted.R306 ( 22k ) high.
PhilipsD16-IIISlight patterning useing scart socket.Mod see Tv Mag.



Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads