Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Philips | CP90 | Dull pic when connected to normal mains - ok with isolated supply | CRT rimband come adrift | ||
Philips | CP90 | Does not start by using remote control | Transistor 7730. Better memory battery 1901, 2,4 V- Code 4822 138 10313. | ||
Philips | CP90 | Does not function | Voltage +95 V not present Check/replace TS 7677 (BUT 11 AF; 4822 130 42679), check/replace TS 7673 (BC 547; 4822 130 44257) and TS 7674 (BC 328; 4822 130 44104) and replace D 6674 by BYD33J (4822 130 42606) Check/replace TS7727 (BC556; | ||
Philips | CP90 | Dead. | R3668 ( 15R ) o/c. | ||
Philips | CP90 | Dead. | C2695 ( 2.2nf ) , D6695 s/c. | ||
Philips | CP90 | Dead. | C2679 ( 1nf 2kV ) , D6679. | ||
Philips | CP90 | Dead. | 1.6amp fuse o/c , check for drys on LOPTX ect. | ||
Philips | CP90 | Dead with pulsing psu - the 95v HT low at 60v | D6702 BZX79-F6V2 zener leaky | ||
Philips | CP90 | Dead with faint whistle | Pri HT OK, No HT at loptr; C2619 1n5 2kv burnt & s/c | ||
Philips | CP90 | Dead with faint whistle | ok on dummy load. BUT11AF loptr s/c - dry joints on chopper tfmr & loptx | ||
Philips | CP90 | Dead set - no st/by LED or chan ind | Check for osc at pins 31 & 32 TMP47C432 micro IC7840. If absent check C2934 & C2935 27pF leaky | ||
Philips | CP90 | Dead PSU working Pulsing | D6610 s/c R3600 o/c D6072 ( 6V2 ) Zener ( if no start up V at junction R3661 R3673 CNX62 u/s ) | ||
Philips | CP90 | DEAD POWER SUPPLY OK NO 6v ON MICRO IC | D6733 OC | ||
Philips | CP90 | Dead no st/by - 95v/22v present | o/c print near M13 plug/skt | ||
Philips | CP90 | Dead no 19V rail F1690 o/c | IC1701 TDA8190 |