Dicas Reparação PHILIPS





Pesquisa: PHILIPS

Resultados 13482

MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
PhilipsCP110Tuning - drift & flickering.Replace D6673 ( BYV95A )
PhilipsCP110Tries to start then shuts downTR7666 BC 337, TR7671 BC327-16, R3628 18R
PhilipsCP110Text - flickering.Replace D6673 ( BYV95A )
PhilipsCP110Striations LHSD6630 o/c
PhilipsCP110Spare part informationSpare part information Only for 25", AG..9047 and AG..9048 In a number of sets the darkglass CRT has been replaced by a light CRT. For Service the darkglass can be used. It is recommended to add R3488 47K.
PhilipsCP110SOUND BUT NO PIC , EHT AND HEATERS OK. MAY BE ONLYCNX62A OPTOCOUPLER CAUSING EXCESSIVE RIPPLE ON LT AND HT LINES
PhilipsCP110Sometimes sound gets louderIC7840 (4822 209 72038 mask 8188 or 4822 209 73665 mask 8189).
PhilipsCP110Sometimes no sound, no pictureReplace IC 7840 (TMP47C432AP-8188; 4822 310 31849) or (TMP47C432AP-8189; 4822 310 31851) Important: mount the metal shielding with earth to R 3276
PhilipsCP110SET STARTS BUT AS PICTURE APPEARS TRIPS VIOLENTLYDEGAUSSING POSITOR US
PhilipsCP110SET PULSES ON AND OFF GRADUALLY STAYING ON LONGERTRY TEA1039 AND OPTOCOUPLER IF STILL FAULTY CHECK 15v PROTECTION PCB NEAR CHOPPER TX AND CHANGE 100uF CAPACITOR
PhilipsCP110Set intermittently tripping and/or reverting to channel 1.Check all spark gaps on CRT base. Resolder aquadag lead to chassis.
PhilipsCP110Servicing the CP110 chassis see TV Mag Jun 1993
PhilipsCP110SCART o/p has no synch with lines/interference - ok on RFCheck for dry joints in PSU, Field & LOP stages. Caps 2075,2072 10u & 2073 33uF = 12v decoupling on sw IC
PhilipsCP110Repeated failure of the supplyMount a resistor in parallel to coil S 5656 (39 Ohm; 4822 050 23909). Check/replace R3655 - 22 Ohm, and C2660 - 1uF at 250 Volts, polyester type. Check resistor R3660 - 0.1 Ohm (4822 113 80429).
PhilipsCP110Reduced widthCheck C2620 ( 22nF ) R3599 ( 47R ) R3629 ( 1M ) R3639 ( 47K )



Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads