| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Philips | CP110 | NO RASTER , EHT AND HEATERS PRESENT | R3570 8.2K FIELD BLANKING STAGE | ||
| Philips | CP110 | No picture, "E1", after changing fuse 1653 works a couple of hours | Diode 6676 sometimes short-circuited (4822 130 80303). Check over voltage panel 1005 (4822 212 23099) | ||
| Philips | CP110 | No picture at 1st - then low contrast. | C2670 & C2621 dried up. | ||
| Philips | CP110 | No pic sound pulsing | HT pulsing & low 100µ cap on psu sub panel | ||
| Philips | CP110 | NO PIC FOR 5mins RIPPLE ON LT + HT WHEN OFF | TR7670 CNX62A OPTOCOUPLER | ||
| Philips | CP110 | No pic at sw on - gradually improving with time (in chassis with Tr7672 fitted) | Excess ripple on 140v line - C2670 & C2621 dried up (22µ 50v) or CNX62A Tr7670 opto coupler | ||
| Philips | CP110 | No pic - sound ok | EHT & A1s gradually appeared with time - C2621 22µ 250v | ||
| Philips | CP110 | NO PIC 1st FEW MINS when it comes on looks low | CHECK C2670 , C2621 BOTH ( 22uF ) 250V | ||
| Philips | CP110 | No EW correction. | R3599 ( 47R , 1/8W ) on CRT base. | ||
| Philips | CP110 | No EW correction & reduced width. | C2613 ( 390nf ) o/c. | ||
| Philips | CP110 | No E-W corr after loptx replacement | R3599 47R o/c (on crt base) Tr7601 or 7600? BF819 s/c c-e | ||
| Philips | CP110 | no E-W corr | Components on crt base Tr7600 running hot - Tr7601 BC558 s/c, R3588 15k, R3587 1k8, R3599 47R all charred. C2589 33µ leaky | ||
| Philips | CP110 | No display the 140v HT only 60 -80v | 7738 6v reg tr BC558 o/c | ||
| Philips | CP110 | NO DISPLAY , 140v LINE LOW AT 60-80v | TRANSISTOR 7738 ( BC548 ) 6v REG | ||
| Philips | CP110 | NO DISPLAY | 10mfd 350v ( RIGHT SIDE BY LOPT ) |