| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Philips | CP110 | Int blue screen | Dry joints on decoder chip & PAL delay line | ||
| Philips | CP110 | Initially no picture; low contrast picture after some minutes. | Check to see if T7672 is conducting when the fault is present. If it is check for ripple on 140 volt HT line. If a ripple is present, check/replace C2670 (4822 124 80494) and 2621 (4822 124 80494). | ||
| Philips | CP110 | IC7260 changed type | IC7260 changed type ------------------- A production change has been introduced changing IC7260 from TDA3562/N5 to TDA3566/N5. At the same time R3292, R3293 and T7267 are deleted. Receivers concerned are date coded QG12940 and later. Reason: Alterna | ||
| Philips | CP110 | Hum in standby; no sound after a while because IC7101 gets too hot | Capacitor 2113 (470uf 35V; 4822 124 41334) goes leaky/short circuit | ||
| Philips | CP110 | HT volts low at 60 - 70v instead of 140v | C2661 2200µ o/c in chopper control network | ||
| Philips | CP110 | hissing sound | chopper transformer replaced | ||
| Philips | CP110 | Fuse 1653 blowing. | Check IC7670 - CNX82A; 4822 130 10025 IC7675 - 12 volt regulator;2822 209 81726 Overvoltage panel 1005; 4822 212 23099 | ||
| Philips | CP110 | Function knobs on CTV fail | Check keyboard or Replace IC 7840 (TMP47C432AP-8188; 4822 310 31849) or (TMP47C432AP-8189: 4822 310 31851). Important: mount the metal shielding with earth to R 3276 | ||
| Philips | CP110 | Field foldover | C2574 | ||
| Philips | CP110 | field cramping | D/J on L5663 or C2574 ( 680uF ) | ||
| Philips | CP110 | Field collapse | Open circuit R3574 120k. | ||
| Philips | CP110 | Field collapse | dry joints 12v reg | ||
| Philips | CP110 | Field collapse | Tr7572 & Tr7573 s/c R3568 & R3571 o/c | ||
| Philips | CP110 | Field - bottom half of pic missing | R3570 8k2 in FOP stage o/c | ||
| Philips | CP110 | F1653 o/c | Later set have over volt sub panel if set has this and fuse blown replace CNX62 opto |