| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Philips | CP110 | F1653 o/c | Later set have over volt sub panel if set has this and fuse blown replace CNX62 opto | ||
| Philips | CP110 | E-W faulty | R3599 47R 1/8w metal oxide o/c on crt base - check C2613 390nF o/c | ||
| Philips | CP110 | East West bowing | R3599 ( 47R ) on CRT base & check Tr7600 & C2613 ( 390nF ) | ||
| Philips | CP110 | DISTORTED VERTICALS | C2633 100uF | ||
| Philips | CP110 | Display reverts to "F1" aft few secs aft sw on | Tr7739 BC548 s/c | ||
| Philips | CP110 | Dead, no start voltage to IC7669 pin 9 | Check C2656 (150uF 385V; 4822 124 42029), for open circuit. | ||
| Philips | CP110 | Dead with F1 in display - 145v HT present | Dry joint D6668 (15 & 12v supplies) | ||
| Philips | CP110 | Dead with "F1" in display | Indicates 12v supply missing - Tr7739 in st/by cct leaky | ||
| Philips | CP110 | DEAD WITH " F1" IN DISPLAY ( " F1 " MEANS 12v SUPP | T7739 LEAKY | ||
| Philips | CP110 | Dead Pri HT low at 190v | Res cap C2656 150µ low cap | ||
| Philips | CP110 | Dead or lines in the upper part of the screen. | C2656 (150uF 385V; 4822 124 42029) open circuit. | ||
| Philips | CP110 | DEAD NO 11v PIN 9 TEA1039 ( ONLY IN START UP ) | C2656 150uF OR C2661 2200uF | ||
| Philips | CP110 | Dead intermittently | 140v HT high at 156v - no line drive, Tr7630 BC337 line dr tr int o/c; dry joints Tr7665 chopper tr coll | ||
| Philips | CP110 | DEAD BUT11AF OK + FUSE OK TEA1039 PIN 2 AT 2v ( NO | REPLACE TEA1039 | ||
| Philips | CP110 | DEAD , 300v AT BUT11AF COLL. LOW START VOLTS AT PIN | C2656 OC. |