| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Philips | CP110 | Dead - volts o/p from bridge rect low at 190v | C2656 150µ low cap | ||
| Philips | CP110 | Dead - tripping chan light pulsing | loptx shorted turns 1-17 | ||
| Philips | CP110 | Dead - no st/by led | 22R safety res 3655 o/c | ||
| Philips | CP110 | Dead - mains fuse shattered | Check mains bridge rects & 150µ 385v mains smoother for shorts | ||
| Philips | CP110 | Dead - fuse ok 300v on collector BUT11. | BUT11 o/c base to emitter. | ||
| Philips | CP110 | Dead - fuse intact | Has high drive amplitude briefly at Chopper Tr at sw on - BUT11 chopper Tr o/c b-e | ||
| Philips | CP110 | Dead - chopper tr may be s/c | C2656 150µ 385v o/c, D6672 BYD33D in 32v supply leaky | ||
| Philips | CP110 | Dead | 1.6A fuse o/c; BUT11AF s/c; mains rect s/c; also replaced CNX62 as precaution. Still no ht - C2656 150µ cause | ||
| Philips | CP110 | Dead | C2162 0.47MFD ( NEAR C2611 ) | ||
| Philips | CP110 | Dead | "F1" SHOWING IN DISPLAY 1653 T1A6 WICKMAN FUSE OPEN | ||
| Philips | CP110 | Dead | BUT11AF , TEA1039 , Bridge rec diodes s/c R3659 ( 100ohm ) , R3658 ( 120R ) C2661 upgrade to ( 2 , 200uF ) & CNX62 | ||
| Philips | CP110 | Corrugated verticals | C2633 100µ 25v | ||
| Philips | CP110 | Corrugated verticals | C2670, 2621 22µ 250v | ||
| Philips | CP110 | Control micro processors | A production change has been introduced adding a shield to the control micro processor to prevent the processor being influenced by external fields. Replacements will be supplied as a kit comprising the processor, shield and fitting instruction. The sh | ||
| Philips | CP110 | Continuous page header display in subtitle | Change text IC to type MAB8461P/W196 part No4822 209 62479 |