Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Philips | ANUBIS-B | Microphonic effect and sound in video. | Change C2267 and C2246 into 100nF X7R type, (4822 122 33496). Change C2268 into 22nF (4822 126 11544). Add condensator 2461 1uF 50V (4822 121 51319) instead of jumper 9164. | ||
Philips | ANUBIS-B | INSTALL or STORE not possible; sound volume might be too low | Check whether "Hotel Mode" is disabled. To check this, see "Frequently Asked Questions", "How to de-activate "Hotel Mode". | ||
Philips | ANUBIS-B | In TXT mode. Vertical white pixels instead of characters. | Check IC7700 - SAA5246 P/H (4822 209 31215) or SAA5246 P/E/S (4822 209 32122). | ||
Philips | ANUBIS-B | In TXT mode picture partly blanked and wrong characters | Check IC7700 - SAA5246 P/H (4822 209 31215) or SAA5246 P/E/S (4822 209 32122). | ||
Philips | ANUBIS-B | How to de-activate "Hotel mode" | Applicable for family: Hotel TV Identification on uP: CV6012/CV6018/CV6109/109 For AB sets Hotel Mode de-activation: ------------------------ Dedicated Hotel TV set, so always hotel mode. Specification of the Hotel mode: ------------------------------- | ||
Philips | ANUBIS-B | How to de-activate "Hotel mode" | Identification on uP: CV6014/CV6107/107 Hotel Mode de-activation: ------------------------ See CV6006, but now first press "INSTALL" on the local keyboard, then press "SLEEPTIMER" on the remote control while keep pressing "INSTALL" on the local keyboard | ||
Philips | ANUBIS-B | How to de-activate "Hotel mode" | Identification on uP: CV6006 Hotel Mode de-activation: ------------------------ Select program 38. Then press simultaneously "INSTALL" and "PROG+" on local keyboard (OSD "38" from red to green). Put the set in stand-by and then switch on via PROG+/-. For | ||
Philips | ANUBIS-B | How to activate "Hotel mode" | Applicable for family: Hotel TV Identification on uP: CV6012/CV6018/CV6109/109 For AB sets Hotel Mode activation: --------------------- Dedicated Hotel TV set, so always hotel mode. Specification of the Hotel mode: ------------------------------- See re | ||
Philips | ANUBIS-B | How to activate "Hotel mode" | Identification on uP: CV6014/CV6107/107 Hotel Mode activation: --------------------- See CV6006, but now first press "INSTALL" on the local keyboard, the press "SLEEPTIMER" on the remote control while keep pressing "INSTALL" on the local keyboard for at | ||
Philips | ANUBIS-B | How to activate "Hotel mode" | Identification on uP: CV6006 Hotel Mode activation: --------------------- First enabling, activate hotel mode option in Service Menu via OPTION 2 menu. Then select program 38. Then press simultaneously "INSTALL" and "PROG+" on local keyboard (OSD "38" fr | ||
Philips | ANUBIS-B | Hotel mode feature | Hotel mode feature ------------------ The software of the ANUBIS B is provided with the "Hotel" mode feature. To activate this feature proceed as follows: 1) With the receiver switched off at the mains switch, interconnect pins M61 and M62 (adjacen | ||
Philips | ANUBIS-B | Horizontal white line at the top side. | Vertical deflection fault, bad contact R3415 (820R 4822 053 11821). | ||
Philips | ANUBIS-B | Horizontal black stripe | Distorted saw-tooth signal at input vertical amplifier. Check C2413 10nF (4822 122 32442). | ||
Philips | ANUBIS-B | From stand-by, by pressing "program -/+", "E3" will be shown | Change the value of C2560 to 1000 uF (4822 124 40214). Change the value of R3452 to 1 Ohm (4822 052 10108). Change the value of R3782 to 18 Ohm (4822 053 10189). | ||
Philips | ANUBIS-B | Error codes | Error codes ----------- The error codes for the Anubis B Hotel TV (xxHTxxxx/xx) is not published yet: For the total overview herewith a table is given for both the normal Anubis B and the Anubis B Hotel: Error LED Anubis B An |