Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Philips | A10 28PW6305 | R/C inop | IR Rx pre-amp 1002 on sub panel front of set- part no. 9322 1275 4667 | ||
Philips | A10 28PW6305 | No R/C - front controls ok | IR preamp rec, cct ref no.1002 on small sub panel at front of set. SEME part no. 9322 1275 4667 only 750mV P.P. at pin 3 of the panel with painter I.C. on, should have been 3.3V P.P | ||
Philips | A10 28PW6305 | Child lock removal | press menu / features / child lock & turn off. If parental control has been activated (locking out certain chans or locking the set) then enter a pin. If not known then enter 0711 TWICE to gain access. You can then change no.or turn funct off. | ||
Philips | A10 | Service mode entering | Enter 062596 then "Menu" | ||
Philips | 9CM0 | Flickering. | Add PVC tape under multipole unit clamping ring on CRT. | ||
Philips | 5GFL2.30E AA | Dead aft storm - led green for 40secs then red | FSS supply not working - fit FSS supply kit - includes module Pt no 4822 310 32214 | ||
Philips | 52ZY3535 Anubis B AA | No pic, sound ok with faint burning smell | No Filed - replace overheated R3452 4R7, R3450 3R9 & IC7400 TDA3653B | ||
Philips | 4CM4270 Monitor | DEAD 190v RAIL LOW | CHANGE T5612 FIRST , BEFORE LOPT!! | ||
Philips | 48UP91 | Picture is blurred and looks washed out | Check for dirty mirrors! | ||
Philips | 41GR884 Proj | Shuts down aft couple of secs | Prot cct on due to R3818 180k o/c on conv/prot board | ||
Philips | 3LC2050 -LCD | No TV sound | audio in at pin 13 IC71 µPC1416G sm chip but nothing out at pin 14 - chip faulty | ||
Philips | 3LC2050 -LCD | No sound TV or radio | R120 10R sm res | ||
Philips | 3D | Voltage +140V is present | Replace TS7618 (2SD1577PH; 4822 130 43921) | ||
Philips | 3D | Tuning unstable | Replace U 1018 (4822 212 22439) | ||
Philips | 3D | Tuning does not function | Check tuning voltage on pin 15 IC 7848. Replace IC 7848 (MEA 2901/07; 4822 209 72127) U 1008 |