Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por:![]() |
---|---|---|---|---|---|
Sanyo | CBP2152 | Int failure to come out of st/by & random chan change | D746 6v2 zener between front panel & 'tac' switch | ||
Sanyo | CBP2148 | St/by only | Momentary contacts on mains sw - should make b4 mains contacts | ||
Sanyo | CBP2147 | St/by only | Fault in st/by cct - linked st/by conn on mains sw to chassis but no st/by facility now available | ||
Sanyo | CBP2146 E2-E21 | Poor sync. | IC1011 ( SAA5230 ) | ||
Sanyo | CBP2146 E2-E21 | Picture fades shortly after switch on. | Drys R479. | ||
Sanyo | CBP2146 E2-E21 | Lack of width & shuts down when set is warm. | C310 ( .047uf 50v ) | ||
Sanyo | CBP2146 E2-E21 | Int red picture. | Drys A602 on CRT base. | ||
Sanyo | CBP2146 E2-E21 | Corrupted text. | IC1031 ( SAA5240A ) | ||
Sanyo | CBP2146 E2-E21 | Corrugated verticals. | Check EHT lead connections. | ||
Sanyo | CBP2146 E2-E21 | Bright raster with flyback lines. | R478 ( 10k ) o/c. | ||
Sanyo | CBP2146 | PIP became negative with overloaded col | PIP interface supply rose from 5v to 6.2v; 5v stab QC0905/3052V on edge of interface board faulty | ||
Sanyo | CBP2146 | Negative picture on small insert. | QC0905A/3052v 5v reg. | ||
Sanyo | CBP2145 E2-B21 | FIELD JITTER AND OR PART FIELD COLLAPSE | C364 C398 100uF 25v | ||
Sanyo | CBP2145 E2 | TUNER SEEMS LOW GAIN FOR 10mins | C397 364 10uF 16v | ||
Sanyo | CBP2145 E2 | Signals noisy with lack of height | C397 100µ 16v |