Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por:![]() |
---|---|---|---|---|---|
Sony | CCDV110 | ZOOM NOT WORKING CORRECTLY | Zoom switch ran one direction only towards wide not telephoto.Found B+ wired to one side of switch and not center. | ||
Sony | CCDV110 | PLAYBACK NO Y INFO AND CAMERA NO ZOOM, NO VIDEO | 1) Traced Y info around VTR back to Pin 2 of VY-8 board buthad no out at Pin 21, traced to no info at Pin 37 of IC0001 on VY-8 buthad info on C049 coupling cap. IC side of cap was soldered but not toland PC. 2) Developed after repair of first problem. | ||
Sony | KV2792R | NO AUDIO, RESOLDER IC-813 PIN 6 | No sound. | ||
Sony | CCDV3 | NO SERVO LOCK | Playback in slow-motion. Unit starts in SP mode then switchesto LP mode even if SP tape is in unit. ATF servo does not appear to locksince noise bars (float) thru picture. Found no drum PG pulse presentfrom drum assy. Ordered drum assy from KC Parts | ||
Sony | CCDV3 | NO CAMERA RECORD | No record from camera (no video output from camera). Founddefective SH-2 circuit board in camera block. Circuit board now on orderfrom KC Parts Center. | ||
Sony | EBP9LC | NEED PART NUMBER FOR ASSY | Customer would like to purchase complete battery holder forthe EBP9LC. The service manual has it broken down into 16 items, can itbe ordered as a complete assy? -HQ COMMENTS: When you want accessory part, you can use model name ofEBP9LC. KCP stocks EB | ||
Sony | TCK5 | AUDIO WARBLE | This is the same problem as reported on TC-K60. (ReportDK-1-3). The lower bushing on the lever comes off, and the motor switchlever is allowed to come up against the reel and puts a flutter in theaudio. | ||
Sony | TCK60 | AUDIO WARBLE | On both these units the lower bushing came off and allowedthe motor switch lever to ride up against the supply reel causingthe audio to have flutter in it. | ||
Sony | STRAV360 | PROTECTION RELAY ENGAGES AT -20DB VOLUME LEVEL | As you increase vol. to -20dB, unit goes into protection. | ||
Sony | CCDV8AFU | P/N FOR MI-2 CABLE | Service manual shows no P/N for MI-2 cable (Pg 82 of S/M)which connects between the (AR-1) board (CN113) and (MA-13) board (CN406).Please inform P/N. -HQ COMMENTS: P/N is 1-935-008-13, but is not available from Tokyo. Asyou mentioned on the phone, you | ||
Sony | SLHF900 | REPLACEMENT CASSETTE DOOR DOES NOT FIT | Cass. doors in S/M. P/N X-3691-652-1 does not fit on cassetteassy. The gear on the door is too small. -HQ COMMENTS: Some units have larger gears and require a different door.Please order under P/N X-3695-018-1. A service bulletin will be issued. | ||
Sony | CCDV110 | IC | IC801, 802, 803 on AF-23 board have no P/Ns in S/M. -HQ COMMENTS: Please refer to the CCD-V5 service manual, AF board, forthe IC part numbers. | ||
Sony | KPR4110 | "D" BOARD COMPLETE, A-1340-692-A | KC has boards for later production run, they have sixconnectors going to it. The one that is needed has 8 connectors goingto it. The chassis # is SCC643AA April 1985. Can this board beobtained? -HQ COMMENTS: It has been found that the later productio | ||
Sony | SLHF500 | LINE FUSE BLOWS AFTER ONE WEEK OF OPERATION | AC line fuse blows after about one week of use when REC isentered. Tried replacing fuse and regulator IC, same problem happened.This is an employees unit. -HQ COMMENTS: Try replacing all surrounding components R1, C1 and T1.Please inform of results. | ||
Sony | EVA80 | UNIT DEAD | Found no initial power up for 4-5 seconds. Clock displayonly. Found that power coming up from PS-49 but no unit turn on forinitialization. Found no osc. (X001) for IC001 on FT-8 board. IC001/23was 5.3V and IC001/24 was 0V. |