Dicas Reparação SONY
Modelo - Chassis
Pesquisa: SONY Enviar Dica Resolvida
Resultados 18940
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | PTB100 | REPLACEMENT PART FOR BLOWER MOTOR NOT AVAILABLE | Microfiche shows replacement P/N 9-910-999-35 no longeravailable. -HQ COMMENTS: Computer lists substitute P/N 1-541-164-00 with one instock. Please order using this P/N. | ||
| Sony | CCDV8AFU | EXCESSIVE NOISE FROM DRUM BEARING | Noisy bearing on drum assembly causing excessive noisein PB and REC of video information. | ||
| Sony | CCDV8 | GREEN SPOT IN PICTURE | Small green spot in picture - visable under wide range oflight levels. | ||
| Sony | SLHF300 | NOISE REC IN SOUND AND PICTURE | When making a recording there was noise in head switching.This caused noise in Beta HiFi audio and picture had jitter. Approx. 7seconds before stopping the recording it would clear up. Tape pathlooked correct. | ||
| Sony | CDXR7 | NO TROUBLESHOOTING GUIDE | Many units failing after 4 or 5 months of use. Failuresvaried and repair time long as no good troubleshooting procedure isavailable. Repair time at SSC is about 1 1/2 hrs - longer at ASC -HQ COMMENTS: CDX trouble guide is just about done and will be p | ||
| Sony | KV1981R | INTERMITTENT VIDEO AND SOUND, REPLACE T251 | Intermittently the picture would turn white and the soundwould become noisy. This is in the tuner mode. Also with no antennathere was no snow present. | ||
| Sony | KV2080R | SOUND LEVEL TOO LOW, CIRCUIT CHANGE | Customers are complaining that the sound output level at thespeakers is too low. | ||
| Sony | KV2090R | SOUND LEVEL TOO LOW, R842 VALUE CHANGE | Customers are complaining about too low sound level at thespeaker. | ||
| Sony | KV2783R | POP IN SOUND, ADD REG CIRCUIT ON "X" BOARD | Pop in sound when changing channels and going thru non-activechannel or when scene changes from dark to bright. Found 18V line voltagejumping. | ||
| Sony | KV1981R | UNIT POWERS UP BUT NO SOUND/PICTURE, REPLACE V OUT IC501 | The unit would power up but there was no sound or picture.Also it was not possible to shut the set off with the front panel control.The problem looked like trouble with the upc. However, we noticed thatthere was no vert. pulse which is necessary for pro | ||
| Sony | CCDM8U | NO DRUM SERVO LOCK - UNIT SHUTS DOWN | Unit | ||
| Sony | CDP45 | INCORRECT P/N - LOADING CHASSIS ASS'Y | Part number listed in manual is incorrect. This part numberis for the loading chassis ass'y used in the CDP-30. The mounting forthe loading motor is different in these units and the part received is notuseable in the CDP-45. I also checked the CDP-35 | ||
| Sony | SLHFR70 | LEFT SIDE OF DISPLAY ON ALL THE TIME | Display segment for pause, sequence, recording, auto, and playare on all the time. This is the 11G section of display. | ||
| Sony | KP5000 | INCORRECT P/N FOR C5304 IN S/M, CORRECT P/N IS 1-130-121-00 | Part number listed for above capacitors shows 1-129-935-00.This part number is for a 500pF 1.5KV capacitor. The correct part numberfor the capacitors is 1-130-121-00. -HQ COMMENTS: We sent the report to correct service manual. | ||
| Sony | CFS950 | DETECTOR BLOCK ASS'Y | When ordering P/N X-3322-501-1, it is subbed to P/NX-3322-540-1. Kansas City has done this twice when ordering P/NX-3322-501-1. I would like to know if the sub part is compatible or hasto be modified. -HQ COMMENTS: Yes, the new Detection Block Ass'y i |