Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | XE3 | NO S/V , MAIN SUPPLIES ALL COECT | CHECK 12v SUPPLY TO TUNER , FOLLOWS COMPLEX PATH VIA R811 , D811 , CONNECTOR D5 , AND A12 PIN 1 , Q207 | ||
Sony | XE3 | Int startup. | C601 ( 2.2uf ) , R608 ( 8.2M ) , R609 ( 2.2M ) | ||
Sony | XE3 | Flyback lines - picture shaded with no signal | C801 leaky. | ||
Sony | XE3 | Flyback - lines - intermittent. | D304. | ||
Sony | XE3 | Dead. | IC601 ( uPC1394C ) , R632 ( 2.2M ) , Q202 ( 2SD788 ) | ||
Sony | XE3 | Dead. | R632 ( 2.2MR ) going high on panel A. | ||
Sony | XE3 | Dead with no drive at pin 7 of the chopper control | R632 ( 2.2M ) , which is connected to pin 4 of IC601 and is used for standby switching. | ||
Sony | XE3 | DEAD , ic OSCILLATING ( MAY START IF ic HEATED ) | R 602 , 2.2M 1/2 W | ||
Sony | XE3 | BLANK SCREEN SOUND OK | uPC1377 LINE OSC IC FAULTY | ||
Sony | XE2 | Tuner out of action | If 33V ok check Q10 for control voltage VC point on tuner if low Replace C134 inside tuner | ||
Sony | XE2 | Startup - no or intermittent - fuse intact | IC601. | ||
Sony | XE2 | Slow startup. | R602 goes high. | ||
Sony | XE2 | No startup. | R602 ( 2.2MR ) o/c , IC601 ( uPC1394C ) | ||
Sony | XE2 | Dead. | R602 ( 2.2MR ) o/c. | ||
Sony | XE2 | Dead - after 5-10 seconds at sw on | R602 high or o/c. |