Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | PE3 | 6" wide bands across screen Black Grey White | Replace C655 ( 220uF ) 5V supply to micro | ||
Sony | PE-2 | INT DEAD WHEN ON PIC TEARS | Q001 BC237 | ||
Sony | PE-2 | Frame foldover at top. | Check earth rail around line transistor. | ||
Sony | PE-2 | Dead - burn up on PSU. | Check for pin hole in mica insulating washer of chopper. | ||
Sony | PE | Blank raster. | IC551 ( TDA2578A ) | ||
Sony | P2E | off with squeeling | BU208A lop tr s/c | ||
Sony | LE1 KL37W2U | no text or menu, red LED flashes 19 times | IC1020 SDA5273P-C134 part 875945222 (megatext) faulty | ||
Sony | KX20PSI | Int field roll with faulty col | Int switching to NTSC standard - CX7916 chip IC503 qaulty | ||
Sony | KVXF25M20 | Lightening damaged | Smoothing cap C613 560uf, Low v p/supply; D631 + D632 - s/c R602 4r7 o/c, C646 10uf 450v - popped, Q605 2SK2845- leaky, D623 12v zener - leaky | ||
Sony | KVX29MN1D | No sound any mode | TA8776 surround sound proc | ||
Sony | KVX2982U | Bright pic with fb lines | R722 680k in A1 o/c on crt base | ||
Sony | KVX2972UB | No pic - HT/EHT present | R701 680k in A1 supplies hi res | ||
Sony | KVX2962U | Slow start up before sound/pic appear then dull green with no sound int | Replaced Q705 (BF871) and R712 (15k) on the tube base. | ||
Sony | KVX2952Y | FRAME CRAMPED WITH FLYBACK LINES | REPLACE C532 100MFD50V | ||
Sony | KVX2942U | GRAPHICS WOBBLE FROM SIDE TO SIDE | RESOLDER 12V REGULATOR UNDER PLASTIC CRADLE |