Dicas Reparação SONY




Modelo - Chassis


Pesquisa: SONY Enviar Dica Resolvida
Resultados 18940
Pedir dica reparação
MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
SonyAE1
Motor boating noise in StByD/J on Heat sink audio output ic earth also check C612
SonyAE1
Luminance intDelay line DL332 faulty - pt no 1-236-062
SonyAE1
LOSES PICTURE ON CHANNEL CHANGE ( INT! ) IC1003 PIL8O7 INT OC ( -30v FEED )
SonyAE1
LOOKS LIKE FINE TUNE OFF WILL NOT LOCK NICAMIC601 DRY
SonyAE1
LINE OP TRANSISTOR KEEPS BLOWINGL806 SC
SonyAE1
Lack of height with cramping in centreThe 27v supply to FOP chip low at 20v, check R802 0R47 & D801 leaky RGP15J
SonyAE1
Lack of height field foldover cramping in centreR801 ( 0.47R )
SonyAE1
Jagged pic - may be intRV502 10k hor phase pot dirty
SonyAE1
intermittent teletext contrast variationsDry joint at the emitter of Q02 on board V
SonyAE1
Intermittent loss of the luminance signalDelay line ( DL332 ) on PCB B. Its part no. is 1-236-062-11.
SonyAE1
Int/slow start upC615 1000µ 25v in 14v supply leaky
SonyAE1
Int won't come out of st/byHT checked - ok at 135v when on but high at 143v in st/by - set st/by set HT control for 135v
SonyAE1
Int picture , touching / adjusting A1 brings pictuCheck for drys on text pcb , particularly on top mounted plugs / sockets
SonyAE1
Int loss sound pic okD/J on IC251 or IC252
SonyAE1
INT LOSS SOUND AND PICTUREQ608 12v REG DRY RESOLDER CHOPPER TX AND METAL PLATES EARTH TABS


Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads