Dicas Reparação SONY
Modelo - Chassis
Pesquisa: SONY Enviar Dica Resolvida
Resultados 18941
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | CDX5090 | UNIT HAS CD SKIPPING PROBLEMS | Unit skips excessively. | ||
| Sony | CDX5090 | DISPLAY IS WRONG, TEXT IS NOT CORRECT. | LCD display has text that is not readable. | ||
| Sony | CDX5090 | CD DOES NOT PLAY, DISPLAY READS E-04 | The LCD display of the unit reads E-04. This may be caused bythe CD making contact with the chucking arm (ref# 122). This may cause theCD not to spin and eventually displaying an error message. | ||
| Sony | CDX5090 | UNIT HAS SKIPPING PROBLEMS,UNIT SHUTS OFF | The CD has Skipping problems and eventually unit shuts off.The unit had loose connections. | ||
| Sony | CDX5090 | UNIT SKIPS | Sometimes unit had difficulty reading CD disc (TORTURE).The disc would start to skip. | ||
| Sony | CDX5070 | CD DOES NOT PLAY, DISPLAY READS E-04 | The LCD display of the unit reads E-04. This may be caused bythe CD making contact with the chucking arm (ref# 122). This may cause theCD not to spin and eventually displaying an error message. | ||
| Sony | CDX5060 | CD DOES NOT PLAY, DISPLAY READS E-04 | The LCD display of the unit reads E-04. This may be caused bythe CD making contact with the chucking arm (ref# 122). This may cause theCD not to spin and eventually displaying an error message. | ||
| Sony | CDX4090 | NO SPEAKER OUTPUTS FROM UNIT | No speaker output. | ||
| Sony | CDX4090 | CD SKIPS | CD Skips when playing. | ||
| Sony | CDX4090 | UNIT HAS SKIPPING PROBLEM | CD Skips. | ||
| Sony | CDX4090 | NO SOUND | No sound. | ||
| Sony | CDX4090 | CD DOES NOT PLAY, DISPLAY READS E-04 | The LCD display of the unit reads E-04. This may be caused bythe CD making contact with the chucking arm (ref# 122). This may cause theCD not to spin and eventually displaying an error message. | ||
| Sony | CDX4050 | CD DOES NOT PLAY, DISPLAY READS E-04 | The LCD display of the unit reads E-04. This may be caused bythe CD making contact with the chucking arm (ref# 122). This may cause theCD not to spin and eventually displaying an error message. | ||
| Sony | CDTRV21 | POOR FOCUS ON EVF (FOUND FOCUS RING ON CRT MOUNTED POORLY) | The unit had poor focus on EVF. Found problem to be caused bythe focus ring being hot-glued to the CRT at an angle which preventedgood focus. This apparentlt occurred during manufacturing. | ||
| Sony | CCDTRV21 | WASHED OUT PIX (FOUND IRIS STUCK OPEN, COLD SOLDER CN-101) | The picture was washed out. Found problem to be caused by astuck iris. Cold solder on CN101 of the CN-98 board resulted in the irisbeing stuck. |