Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | CCDTR84 | DEAD (FOUND BATTERY WAS ONLY INSERTED TO FIRST LATCH POINT) | No Power. Found that the problem was caused by the batterynot being fully secured to the camera. This year's models have a newlocking mechanism which actually has 2 points at which the user will feela latched-in condition. The contacts of the battery | ||
Sony | CCDTR84 | DEAD, BUT UNIT DRAWS .25 AMPS CONSANTLY (FOUND X400 BAD) | Unit appeared dead. However, it was constantly drawing .25amps from an external power supply. This current draw was found to becaused by mode control IC303 always outputting the VTR D-D ON signal, butthere was nothing wrong with IC303 itself. Problem | ||
Sony | CCDTR814 | DEAD (FOUND BATTERY WAS ONLY INSERTED TO FIRST LATCH POINT) | No Power. Found that the problem was caused by the batterynot being fully secured to the camera. This year's models have a newlocking mechanism which actually has 2 points at which the user will feela latched-in condition. The contacts of the battery | ||
Sony | CCDTR78 | DEAD (FOUND BATTERY WAS ONLY INSERTED TO FIRST LATCH POINT) | No Power. Found that the problem was caused by the batterynot being fully secured to the camera. This year's models have a newlocking mechanism which actually has 2 points at which the user will feela latched-in condition. The contacts of the battery | ||
Sony | CCDTR74 | DEAD (FOUND BATTERY WAS ONLY INSERTED TO FIRST LATCH POINT) | No Power. Found that the problem was caused by the batterynot being fully secured to the camera. This year's models have a newlocking mechanism which actually has 2 points at which the user will feela latched-in condition. The contacts of the battery | ||
Sony | CCDTR74 | DEAD, BUT UNIT DRAWS .25 AMPS CONSANTLY (FOUND X400 BAD) | Unit appeared dead. However, it was constantly drawing .25amps from an external power supply. This current draw was found to becaused by mode control IC303 always outputting the VTR D-D ON signal, butthere was nothing wrong with IC303 itself. Problem | ||
Sony | CCDTR73 | AFTER CHANGING DRUM, NO PIX | Unit had line in playback. Servicer ordered A-7048-776-A andit was on b/o for 2 mos. Drum was replaced by A-7048-823-A. Servicersays unit has no RF output now and pin configuration on drum is different.Could this be the cause of no RF output? See att | ||
Sony | CCDTR714 | DEAD (FOUND BATTERY WAS ONLY INSERTED TO FIRST LATCH POINT) | No Power. Found that the problem was caused by the batterynot being fully secured to the camera. This year's models have a newlocking mechanism which actually has 2 points at which the user will feela latched-in condition. The contacts of the battery | ||
Sony | CCDTR70 | NO EJECT (FOUND BAD CONNECTIONS ON VS112 MCB) | No eject. | ||
Sony | CCDTR64 | DEAD (FOUND BATTERY WAS ONLY INSERTED TO FIRST LATCH POINT) | No Power. Found that the problem was caused by the batterynot being fully secured to the camera. This year's models have a newlocking mechanism which actually has 2 points at which the user will feela latched-in condition. The contacts of the battery | ||
Sony | CCDTR64 | DEAD, BUT UNIT DRAWS .25 AMPS CONSANTLY (FOUND X400 BAD) | Unit appeared dead. However, it was constantly drawing .25amps from an external power supply. This current draw was found to becaused by mode control IC303 always outputting the VTR D-D ON signal, butthere was nothing wrong with IC303 itself. Problem | ||
Sony | CCDTR614 | DEAD (FOUND BATTERY WAS ONLY INSERTED TO FIRST LATCH POINT) | No Power. Found that the problem was caused by the batterynot being fully secured to the camera. This year's models have a newlocking mechanism which actually has 2 points at which the user will feela latched-in condition. The contacts of the battery | ||
Sony | CCDTR600 | BATTERY LOCK CLAW BROKEN | Battery does not stay on. | ||
Sony | CCDTR6 | IF AU-92 UNAVAILABLE, AU-51 CAN BE USED WITH MINOR CHANGES | The unit had audio problems the AU-92 board was no longeravailable. | ||
Sony | CCDTR54 | DEAD (FOUND BATTERY WAS ONLY INSERTED TO FIRST LATCH POINT) | No Power. Found that the problem was caused by the batterynot being fully secured to the camera. This year's models have a newlocking mechanism which actually has 2 points at which the user will feela latched-in condition. The contacts of the battery |