Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | CCDFX730V | NO VIDEO OR DISTORTED VIDEO (RESOLDERED IC503) | Have seen a number of FX730V units with no video ordistorted video. Problem involves solder connections around IC503. | ||
Sony | CCDFX710 | UNIT DEAD, F950 OPENS (EDGE OF BRACKET SHORTED TO FP607) | Unit would intermittently go dead, F950 would open. Afterreplacing F950, unit would work OK again for a while, then F950 would blowagain. Also found this problem on serial number 1010139. | ||
Sony | CCDFX640 | INTERMITTENT EJECT (RESOLDERED IC503 AND RB503) | Three main symptoms are: intermittent eject, dead, in E-Elooks like character generator missing (only dots). Mkt. 3/95 | ||
Sony | CCDFX640 | NO COLOR IN CAMERA VIDEO (FOUND L605 NOT SECURED TO VC142) | No color in camera video. Problem caused by L605 comingloose from board. L605 is a peaking coil in the chroma buffer amp. | ||
Sony | CCDFX640 | UNIT DEAD (RESOLDERED IC503) | Unit dead on other cameras this may be intermittent power. | ||
Sony | CCDFX640 | INT. PIX/DEAD, OTHER FAILURES (RESOLDERED CN504 & IC503) | Seeing a number of assorted failures involving poorsoldering on IC503/mode CPU and VS111 board connection CN504 whichconnects the DC-DC converter board/DD65. A unit may have one or more ofthe following symptoms:IC503 - poor soldering - intermittent pict | ||
Sony | CCDFX640 | APPEARS TO BE STUCK IN RECORD PAUSE (RELOADED DEFAULT DATA) | Unit comes on in VTR mode. Camera is also on. It appearsthat the unit is stuck in record pause. | ||
Sony | CCDFX340 | INTERMITTENT CAMERA COLOR (FOUND POOR SOLDER, L605 ON VC159) | Intermittent color from camera video. Problem caused by apoorly soldered L605. L605 is a peaking coil in the chroma buffer Q605. | ||
Sony | CCDFX310 | INTERMITTENT MOSAIC PICTURE (FOUND SYNC GENERATOR IC704 BAD) | Camera had intermittent mosaic type picture upon power on.This would happen every 4-5 times of powering unit on and off. | ||
Sony | CCDF77 | NO PIX FROM VTR, NO PB RF (FOUND OPEN TRACE ON SS100 BOARD) | When camcorder is in play mode, no picture. No RF on pin 3of CN508 (PBRF testpoint). Also missing was switching 5V (REC/PB) on pins11/12 of CN501 and pin 25 of IC506. Also missing was 5V on pin 27 ofsame IC. Found power line 5V open between L502 and | ||
Sony | CCDF601 | NO PIX FROM VTR, NO PB RF (FOUND OPEN TRACE ON SS100 BOARD) | When camcorder is in play mode, no picture. No RF on pin 3of CN508 (PBRF testpoint). Also missing was switching 5V (REC/PB) on pins11/12 of CN501 and pin 25 of IC506. Also missing was 5V on pin 27 ofsame IC. Found power line 5V open between L502 and | ||
Sony | CCDF56 | NO PIX FROM VTR, NO PB RF (FOUND OPEN TRACE ON SS100 BOARD) | When camcorder is in play mode, no picture. No RF on pin 3of CN508 (PBRF testpoint). Also missing was switching 5V (REC/PB) on pins11/12 of CN501 and pin 25 of IC506. Also missing was 5V on pin 27 ofsame IC. Found power line 5V open between L502 and | ||
Sony | CCDF55 | NO PIX FROM VTR, NO PB RF (FOUND OPEN TRACE ON SS100 BOARD) | When camcorder is in play mode, no picture. No RF on pin 3of CN508 (PBRF testpoint). Also missing was switching 5V (REC/PB) on pins11/12 of CN501 and pin 25 of IC506. Also missing was 5V on pin 27 ofsame IC. Found power line 5V open between L502 and | ||
Sony | CCDF501 | NO PIX FROM VTR, NO PB RF (FOUND OPEN TRACE ON SS100 BOARD) | When camcorder is in play mode, no picture. No RF on pin 3of CN508 (PBRF testpoint). Also missing was switching 5V (REC/PB) on pins11/12 of CN501 and pin 25 of IC506. Also missing was 5V on pin 27 ofsame IC. Found power line 5V open between L502 and | ||
Sony | CCDF402 | NO PIX FROM VTR, NO PB RF (FOUND OPEN TRACE ON SS100 BOARD) | When camcorder is in play mode, no picture. No RF on pin 3of CN508 (PBRF testpoint). Also missing was switching 5V (REC/PB) on pins11/12 of CN501 and pin 25 of IC506. Also missing was 5V on pin 27 ofsame IC. Found power line 5V open between L502 and |