Dicas Reparação SONY




Modelo - Chassis


Pesquisa: SONY Enviar Dica Resolvida
Resultados 18944
Pedir dica reparação
MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
SonySLV770HF
TAPE MOTION STOPS AFTER 1 OR 2 HOURS, ERROR L30.1 Tape stops after playing for 1 to 2 hrs with a TU error L30.1.
SonySLV750HF
POOR PICTURE ON TAPE AND TUNER - REPLACED C704 ON MA144 BD Picture quality dark and distorted on both tuner and tape playback.
SonySLV740HF
NO AUDIO, VERY DIM DISPLAY - REPLACE CP102 Set did not have audio and very dim display (almost out). Checked voltages on HF-34 board and found no VEE (-5.1V) on audio processor IC101. Pin 9 of CP102 (-30V) reads 2.2V.
SonySLV740HF
INTERMITTENTLY LOCKED UP Unit intermittently locked up with no emergency code displayed.
SonySLV740
NO DISPLAY - SEE S/B # VID 257 No front display.
SonySLV720HF
POWER WOULD CYCLE ON/OFF - REPLACED SHORTED DRUM MOTOR Power & display would cycle on and off.
SonySLV676UC
NO CTL NOT TRACKING - REPLACE X503 ON MA62 BOARD Unit had no counter or CTL track, will not lock up.
SonySLV676UC
NO ADUIO ON PLAYBACK OF RECORDING- REPLACE C268 ON MA62 BOAR No audio playback of recording. If tape is played in another VCR, audio was fine.
SonySLV640HF
POWER & DISPLAY WOULD CYCLE ON/OFF - REPLACED SHORTED CAPSTA When powered up, the display would flash on and off.
SonySLV640HF
NO DISPLAY - REPLACED CP102 ON PS-327 BOARD No front display.
SonySLV440
LOW AUDIO ON RECORDING -REPLACED IC301 Low audio when recording. Playback pre recorded tapes ok. Found audio signal at pin 1 IC301 on rec missing.
SonySCPH1001
SCRAMBLE VIDEO Found defective GPU. Did pic test some pins aren'tsoldered, resoldered but can't fix. Replaced GPU, problem fixed.
SonyGV500
DISTORTED PIX, INCLUDING CHROMA (REPLACED LEAKY CAPACITORS) Distorted pix (including chroma). Most of the 22uf/6v,10uf/16v, and 47uf/4v capacitors have leakage marks around and under them.
SonyGV200
UNIT DOESN'T WORK ON POWER SUPPLY - REPLACED SHORTED Q404 Unit works on battery but not on power supply.
SonyEVS900
NO PICTURE IN PLAYBACK - REPLACE IC500 ON SP-7 BOARD No picture in playback sometimes in pause picture would be ok.


Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads