Dicas Reparação SONY




Modelo - Chassis


Pesquisa: SONY Enviar Dica Resolvida
Resultados 18944
Pedir dica reparação
MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
SonyITID500
INTERMITTENT DISPLAY OF ID INFO customer complaint of unit dropping or not showing the O inthe ones column of the date. Every 10th, 20th, 30th of the month thedate would read 6/1-/95, 6/2-/95, 6/3-/95. Customer also stated thatsometimes unit would not display ID info at all, though
SonyITA555
ICM PLAYBACK HAS LOW AUDIO LEVEL ICM audio sounded low during playback. Audio level at therecord head during record of ICM was half the value of comparable unit.The audio out of IC503/pin 10 was normal. -SOLUTION : Changed the value of R522 from 27k to 1k. Audio level isnow correct
SonyITA4000
NO CALL WAITING - REPLACE Q301, P/N 8-729-804-09 Flash button would not activate call waiting. Also found unitwould not pulse dial.
SonyMDP650
DISPLAY NOT WORKING - SEE PFR # R0111 FOR DETAILS Display would alsmost work. Heating the dc/ac converter circuit would make the display light but very dim. Traced problem to defective C102 on FP-746 board.
SonyMDP510
INT. MAY NOT WORK - REPLACED REF # 167 P/N 1-574-648-11 Unit has a very intermittent problem. It may work fine for several days and then not work at all. The flex cable to the optical unit may develop cracks that are hard to see. Pushing on the cable with a CD in the unit whil
SonyMDP500
REPLACEMENT CAPS SHORTED New replacement capacitors shorted. The 1000UF 6.3V caps off the 5V lines on MD-712 & PS-716 boards are shorting. This is the second unit that was returned with shorted new caps.
SonyMDP333
INT. MAY NOT WORK - REPLACED REF # 167 P/N 1-574-648-11 Unit has a very intermittent problem. It may work fine for several days and then not work at all. The flex cable to the optical unit may develop cracks that are hard to see. Pushing on the cable with a CD in the unit whil
SonyMDP1100
INT. MAY NOT WORK - REPLACED REF # 167 P/N 1-574-648-11 Unit has a very intermittent problem. It may work fine for several days and then not work at all. The flex cable to the optical unit may develop cracks that are hard to see. Pushing on the cable with a CD in the unit whil
SonyTCW365
NO DISPLAY LIGHTS - REATTACHED DISPLAY CABLE No display lights.
SonyTCK461
HIGH WOW & FLUTTER High wow & flutter.
SonySTRGX900ES
NO SOUND IN SOUND FIELD MODES - REPLACED IC404 The unit will not work with the sound field modes, only withthe direst pass on. Traced active digital signal to input of IC404.Output pins 25 &27 produced only square waves.
SonySTRGX900ES
RIGHT CHANNEL NOT WORKING - RESOLDER RV502 RV502 balance control had bad solder, no right signal to volume.
SonySTRD665
UNIT IN PROTECT - RECONNECTED VOL BOARD Found volume M board disconnected for main board.
SonySTRD665
DEAD - REPLACED SYSCON IC201 Unit dead. Due to syscon, CPU/IC201 loading the 5 v line.
SonySTRD2020
RIGHT CHANNEL IS WEAK - REPLACED VOL CONTROL The right channel is noticably lower in volume when referencedagainst the left channel.


Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads