Dicas Reparação SONY




Modelo - Chassis


Pesquisa: SONY Enviar Dica Resolvida
Resultados 18944
Pedir dica reparação
MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
SonyWMFX435
GEAR CHATTER IN FWD/RVS DIRECTION, PLAY Gear chatter in both direction of play.
SonyWMFX435
NO FM RECEPTION No reception in FM, unit only produces static. Commonproblem, seen in three units in a row.
SonyWMFX435
MECH JAMS Play lever gets stuck. Assembly where clutch assy (#115) isattached becomes loose and gets stuck under play lever.
SonyWMFX435
FF/RW SPRING POST BREAKS OFF CHASSIS Post that hold spring ref 112, breaks off of chassis. Fastforward and rewind buttons do not disengage and are jammed in downpossition. This requires replacement of entire chassis ref 109, torestore operation. Very time consuming.
SonyWMFX433
NO FM RECEPTION No reception in FM, unit only produces static. Commonproblem, seen in three units in a row.
SonyWMFS495
"E" FLASHES ON DISPLAY E flashes on display.
SonyWMFS495
INTERMITTENT TAKE UP Pin that pushes p. roller assy to left or right forautoreverse jumps under slider causing pendulum not to engage take up.Pin and slider were slightly bent. -HQ COMMENTS: Throughout our reliability tracking of this model, Tokyohas been advised to improve
SonyMZ2P
GEARS STRIP Worm wheel stripped 2 months after it was replaced. Thisgear is meshed with a brass worm gear is this a potention problem?
SonySLVR5UC
E-E PIX LOOKS LIKE BAD HORIZ SYNC-REPLC SHORTED Q673/LR10 BD E-E pix bad, playback ok. Found Q673 on LR10 board shorted.
SonySLV940HF
INTERMITTENT OPERATION - REPLACED X201 ON MA-214 BOARD Int. won't work properly.
SonySLV780HF
INTERMITTENT OPERATION - REPLACED X201 ON MA-214 BOARD Int. won't work properly.
SonySLV780HF
LINES IN PIX - TAPE PATH ALIGNMENT Lines in pix.
SonySLV780HF
NO TRACKING Tracking doesn't work.
SonySLV780HF
NO POWER - REPLACED CP123 No power.
SonySLV740HF
INTERMITTENT OPERATION - REPLACED X201 ON MA-214 BOARD Int. won't work properly.


Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads