Dicas Reparação SONY
Modelo - Chassis
Pesquisa: SONY Enviar Dica Resolvida
Resultados 18945
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | KV27V10 | NO AUTO PROGRAM FUNCTION, RESPLDERED R062 | Unit would not auto-program. Feature would not work due toabsence of H SYNC at IC101/pin 28. Problem cuased by poor solderconnection on R062 in the base circuit of Q0001, M board. Sync separatorcircuit which inputs to IC101/pin 28. Resoldering solve | ||
| Sony | KV27TS29 | INTERMITTENT BRIGHTNESS, REPLACED R526 | Brightness does not always come on. Found R526, 220k open. | ||
| Sony | KV27S15 | INTERMITTENT NO CHANNEL CHANGE(BUT OSD CHANGE),R005 ON M BRD | Unit would intermittently not change channels, but the OSD would indicate that the channels were changing. | ||
| Sony | KV27S10 | VERTICAL DOWN ABOUT 2 IN FROM TOP, REPLACED R539 & IC101 | Vertical was down about 2 from top. checked voltage on TP98and read 1.8v. Tech determined to be FBT. Replaced FBT with sameproblem. Checked another set and TP98 should be 11.8v not 15v asschematic states. Traced problem to R539 had changed value from | ||
| Sony | KV27S10 | NO PICTURE, REPLACED R701 | No picture but has sound. Found low voltage on G2 pin5 crt socket... Found R701 open. | ||
| Sony | KV27FX10 | NO PICTURE SOUND OK, REPLACED R542 AND D809 | No picture, but sound is OK. | ||
| Sony | KV27EXR25 | UNIT SHUT DOWN, REPLACED IC101 | Shut down intermittently. OSD had a 60Hz bend only OSD picture perfect. | ||
| Sony | KV20VM20 | TINY HOR.LINE IN MIDDLEOF SCREEN,IC301/PIN 7 RE-SOLDERED | Tiny horizontal line that split screen in middle.Replacing IC1301 didn't hold. Found crack on foil connected toic-301/pin 7. | ||
| Sony | KV20VM20 | NO AUDIO, REPLACED FL401 | No audio signal at the audio input connector P1602/pin 1 onthe D board. Nor at the base of Q451 on the MA board. Audio waspresent at IC401/pin 14 . Found Filter FL401 located between IC401/pin 14 and the base of Q451 was open. | ||
| Sony | KV20S10 | 1/3 OF PICTURE IS BLANKOUT, RESOLDERED FLYBACKPIN 8 | Pix 1/3 up screen, no video just raster, bottom 1/3 of pix isblack not scanned on. -SOLUTION :Replaced IC501, believe vert problem? Turned out that 13vwas low, 11v, found out pin 8 of FBT bad joint resoldered pin 8 set ok.Do not understand why 13v lin | ||
| Sony | KV20S10 | INTERMITTENT TUNING, REPLACED TUNER | Channels get static then come on. | ||
| Sony | KV20S10 | DEAD, NPF, | Dead. | ||
| Sony | KV20S10 | PICTURE FLIPS, ADJ VFRE | Picture flips. | ||
| Sony | KV13VM20 | NO PICTURE, REPLACED CRT | No picture, sound ok. | ||
| Sony | KV13TR24 | INTERMITTENT NO PICTURE OR SNOW, REPLACED LEAKY D101 | Unit would go to snowy or intermittent picture. |