Dicas Reparação SONY
Modelo - Chassis
Pesquisa: SONY Enviar Dica Resolvida
Resultados 18945
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | SPP2010 | EXCESSIVE CROSSOVER DISTORTION ONTO HANDSET SPEAKER. | Excessive crossover distortion onto handset speaker. | ||
| Sony | SPP2010 | HANDSET CUTS IN AND OUT DURING C0NVERSATION | Handset cuts in and out during conversation. Battery terminalsin handset were not making secure contact with the battery. They wereeither bent out of shape (due to pressure exerted by battery when pushedin), or desoldered. If ref 16 (battery terminal) is | ||
| Sony | SPP2010 | LOW BATTERY AFTER CHARGING. | Customer states they have low battery after charging for longtime. | ||
| Sony | SPP2000 | EXCESSIVE CROSSOVER DISTORTION ONTO HANDSET SPEAKER. | Excessive crossover distortion onto handset speaker. | ||
| Sony | SPP2000 | HANDSET CUTS IN AND OUT DURING C0NVERSATION | Handset cuts in and out during conversation. Battery terminalsin handset were not making secure contact with the battery. They wereeither bent out of shape (due to pressure exerted by battery when pushedin), or desoldered. If ref 16 (battery terminal) is | ||
| Sony | SPP2000 | LOW BATTERY AFTER CHARGING. | Customer states they have low battery after charging for longtime. | ||
| Sony | SPP1010 | HANDSET CUTS IN AND OUT DURING C0NVERSATION | Handset cuts in and out during conversation. Battery terminalsin handset were not making secure contact with the battery. They wereeither bent out of shape (due to pressure exerted by battery when pushedin), or desoldered. If ref 16 (battery terminal) is | ||
| Sony | SPP1010 | WIRING IC NUMBER AT PIC DIAGRAM PGE 22 S/M | IC901 and IC910 are wrong in pictorial diagram at printedwiring board handset. | ||
| Sony | SPP1010 | NO TONE DIALING, PULSE OK - REPLACE DIALER IC503 IN BASE | No tone dialing, pulse ok. | ||
| Sony | SPP1010 | LOW BATTERY AFTER CHARGING. | Customer states they have low battery after charging for longtime. | ||
| Sony | SPP1000 | UNIT LOCKED ON THE LINE - REPLACE IC501, P/N 875927391 | Unit seized the line as soon as it was powered up. Line relayRY401 on base set was energized all the time. Replacement of relay drivetransistor Q401 did not fix the problem. | ||
| Sony | SPP1000 | UNIT WILL NOT FULLY CHARGE - REPLACE IC801, P/N 875932467 | Unit will not indicate that battery is fully charged even ifit measures a full charge. | ||
| Sony | SPP1000 | HANDSET CUTS IN AND OUT DURING C0NVERSATION | Handset cuts in and out during conversation. Battery terminalsin handset were not making secure contact with the battery. They wereeither bent out of shape (due to pressure exerted by battery when pushedin), or desoldered. If ref 16 (battery terminal) is | ||
| Sony | SPP1000 | NO DIAL IN TONE MODE, PULSE OK - REPLACE IC301, 875926390 | Base dials in pulse mode but not in tone mode. DTMF waspresent at IC301/pin 35, but no output from BTL. -SOLUTION : Replaced IC301. | ||
| Sony | SPP1000 | NO HANDSHAKE BETWEEN BASE AND HANDSET - RESOLDER CHARGE LED. | No lockup. Charge light doesn't come on although there ischarging voltage when handset is in cradle. Handset and base both pass intester. |