Dicas Reparação SONY
Modelo - Chassis
Pesquisa: SONY Enviar Dica Resolvida
Resultados 18945
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | CDPCA9ES | 5 DISC CHANGER WITH WHINE PROBLEM | Certain discs cause BU assy to vibrate like a tuning fork. | ||
| Sony | CDPCA8ES | 5 DISC CHANGER WITH WHINE PROBLEM | Certain discs cause BU assy to vibrate like a tuning fork. | ||
| Sony | CDPC85ES | INTERMITTENT SHUT DOWN - REPLACED D913 | Unit would play perfectly for a time. 5 mins to severalhours. When in failure mode, laser would return to home position andun-chuck the disc. CLV motor may also spin rapidly. | ||
| Sony | CDPC745 | TRAY MOTOR SPINNING BACKWARDS - REPLACE TABLE MOTOR | Ran into this problem 5 times in past 3 weeks. Removed traymotor. Old motor is installed with lable on motor facing up. If newmotor is installed with label facing up, motor will spin backwards andtray will not function properly. | ||
| Sony | CDPC665 | DRAWER WON'T OPEN - SECURED LOOSE SENSOR BOARD | Drawer won't open, carousel jammed over disc table. Foundsensor board was never screwed down. Board came loose and jammed mech,damaged components. | ||
| Sony | CDPC545 | TRAY MOTOR SPINNING BACKWARDS - REPLACE TABLE MOTOR | Ran into this problem 5 times in past 3 weeks. Removed traymotor. Old motor is installed with lable on motor facing up. If newmotor is installed with label facing up, motor will spin backwards andtray will not function properly. | ||
| Sony | CDPC535 | TRAY MOTOR SPINNING BACKWARDS - REPLACE TABLE MOTOR | Ran into this problem 5 times in past 3 weeks. Removed traymotor. Old motor is installed with lable on motor facing up. If newmotor is installed with label facing up, motor will spin backwards andtray will not function properly. | ||
| Sony | CDPC445 | TRAY MOTOR SPINNING BACKWARDS - REPLACE TABLE MOTOR | Ran into this problem 5 times in past 3 weeks. Removed traymotor. Old motor is installed with lable on motor facing up. If newmotor is installed with label facing up, motor will spin backwards andtray will not function properly. | ||
| Sony | CDPC435 | TRAY MOTOR SPINNING BACKWARDS - REPLACE TABLE MOTOR | Ran into this problem 5 times in past 3 weeks. Removed traymotor. Old motor is installed with lable on motor facing up. If newmotor is installed with label facing up, motor will spin backwards andtray will not function properly. | ||
| Sony | CDPC345 | TRAY MOTOR SPINNING BACKWARDS - REPLACE TABLE MOTOR | Ran into this problem 5 times in past 3 weeks. Removed traymotor. Old motor is installed with lable on motor facing up. If newmotor is installed with lable facing up, motor will spin backwards andtray will not function properly. | ||
| Sony | CDPC345 | CD DRAWER TAKES MINUTES TO OPEN - REPLACED IC451 | Drawer took several minutes to open. Found drawer would spinendlessly. | ||
| Sony | CDPC245 | TRAY MOTOR SPINNING BACKWARDS - REPLACE TABLE MOTOR | Ran into this problem 5 times in past 3 weeks. Removed traymotor. Old motor is installed with lable on motor facing up. If newmotor is installed with label facing up, motor will spin backwards andtray will not function properly. | ||
| Sony | CDPC245 | DISC TABLE WON'T STOP - REPLACED M801 | Disc table rotates continuously and cd player wont' detectdiscs. Replaced flex cable and checked D801 sensor, player is still doingsame thing. | ||
| Sony | CDPC235 | TRAY MOTOR SPINNING BACKWARDS - REPLACE TABLE MOTOR | Ran into this problem 5 times in past 3 weeks. Removed traymotor. Old motor is installed with lable on motor facing up. If newmotor is installed with label facing up, motor will spin backwards andtray will not function properly. | ||
| Sony | XRU330 | UNIT WILL NOT TURN ON (REPLACED LEAKY D202 AND D203) | Unit will accept the tape and play but once turned off can notturn it on. |