Dicas Reparação SONY




Modelo - Chassis


Pesquisa: SONY Enviar Dica Resolvida
Resultados 18945
Pedir dica reparação
MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
SonyXRU220
UNIT WILL NOT TURN ON (REPLACED LEAKY D202 AND D203) Unit will accept the tape and play but once turned off can notturn it on.
SonyXRC720
NO AUDIO (FOUND AUDIO AMP IC781 DEFECTIVE) No audio. Found audio amp IC781 defective. -HQ COMMENTS: Tokyo has analyzed samples we sent them and havedetermined that the defects are ususally caused by excessive reversevoltage being applied to the IC, probably by the power antenna relayturning off
SonyXRC620
NO AUDIO (FOUND AUDIO AMP IC781 DEFECTIVE) No audio. Found audio amp IC781 defective. -HQ COMMENTS: Tokyo has analyzed samples we sent them and havedetermined that the defects are ususally caused by excessive reversevoltage being applied to the IC, probably by the power antenna relayturning off
SonyXRC610
NO AUDIO (FOUND AUDIO AMP IC781 DEFECTIVE) No audio. Found audio amp IC781 defective. -HQ COMMENTS: Tokyo has analyzed samples we sent them and havedetermined that the defects are ususally caused by excessive reversevoltage being applied to the IC, probably by the power antenna relayturning off
SonyXRC520
NO AUDIO (FOUND AUDIO AMP IC901 DEFECTIVE) No audio. Found audio amp IC901 defective. -HQ COMMENTS: Tokyo has analyzed samples we sent them and havedetermined that the defects are ususally caused by excessive reversevoltage being applied to the IC, probably by the power antenna relayturning off
SonyXRC410
NO AUDIO (FOUND AUDIO AMP IC901 DEFECTIVE) No audio. Found audio amp IC901 defective. -HQ COMMENTS: Tokyo has analyzed samples we sent them and havedetermined that the defects are ususally caused by excessive reversevoltage being applied to the IC, probably by the power antenna relayturning off
SonyXRC210
NO AUDIO (FOUND AUDIO AMP IC901 DEFECTIVE) No audio. Found audio amp IC901 defective. -HQ COMMENTS: Tokyo has analyzed samples we sent them and havedetermined that the defects are ususally caused by excessive reversevoltage being applied to the IC, probably by the power antenna relayturning off
SonyXRC190
NO AUDIO (FOUND AUDIO AMP IC901 DEFECTIVE) No audio. Found audio amp IC901 defective. -HQ COMMENTS: Tokyo has analyzed samples we sent them and havedetermined that the defects are ususally caused by excessive reversevoltage being applied to the IC, probably by the power antenna relayturning off
SonyXR6450
NO AUDIO (FOUND AUDIO AMP IC901 DEFECTIVE) No audio. Found audio amp IC901 defective. -HQ COMMENTS: Tokyo has analyzed samples we sent them and havedetermined that the defects are ususally caused by excessive reversevoltage being applied to the IC, probably by the power antenna relayturning off
SonyXR6450
NO AUDIO (RESOLDERED B+ TRACE TO AUDIO AMP IC901) No audio output.
SonyXR6450
NO POWER (FOUND R650 OPEN) No power. Found no voltage on D653/Q651, caused by R650 beingopen. R650 in series with ACC line which feeds D653/Q651 and is connectedto pin 55 (ACC CHECK) on IC501 system control IC.
SonyXR35OO
NO EJECT (LUBRICATED EJECT LOCK ASSEMBLY) Would not eject tape.
SonyXR3500
NO AUDIO (FOUND AUDIO AMP IC500 DEFECTIVE) No audio. Found audio amp IC500 defective. -HQ COMMENTS: Tokyo has analyzed samples we sent them and havedetermined that the defects are ususally caused by excessive reversevoltage being applied to the IC, probably by the power antenna relayturning off
SonyXR3500
NO AUDIO (FOUND AUDIO AMP IC DEFECTIVE) No audio output.
SonyXR2900
NO TAPE FUNCTION (FOUND PM701, Q301, AND IC301 DEFECTIVE) No tape function. Found AMS solenoid PM701 overheated,causing the coil to short. Q301 solenoid drive transistor was shorted andIC301 (FF-REW amp) was also shorted.


Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads