Dicas Reparação SONY
Modelo - Chassis
Pesquisa: SONY Enviar Dica Resolvida
Resultados 18945
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | SSM620AM | CHANGE IN RELAY RY-801, PART NUMBER, SEE BELOW | There are two types of power relay used in this model. Pleaseorder the Relay using the part numbers below.Reference Description Part Number Serial NumberRY-801 Power Relay 9-994-059-01 up to 101,200RY-801 Power Rela | ||
| Sony | SSM621AM | PART NUMBER FOR RELAY INCORRECT, 9-995-671-01 | Part number for the Power Relay, reference RY-801, isincorrect. | ||
| Sony | WMFX55 | UNWANTED SWITCHING OF TAPE SIDES - RESOLDER J-301. | There were assorted tape control problems such as switchingfrom side to side, etc. or seemingly remote control problems. I have seenthis problem on several units. | ||
| Sony | CFD768 | INTERMITTENT AUDIO (RESOLDER CN316 ON MEGABASS BOARD) | Audio was intermittent. | ||
| Sony | CFD758 | INTERMITTENT AUDIO (RESOLDER CN316 ON MEGABASS BOARD) | Audio was intermittent. | ||
| Sony | CDPC505 | LEGS OF POWER TRANSFORMER DO NOT MATCH HOLES ON PCB | The power transformers supplied by NPC (p/n 1-449-954-11) havelegs which do not line up with the holes on the power PCB. -HQ COMMENTS: Tokyo has advised that the transformer can be adapted tothe power board by trimming the two leads that do not match th | ||
| Sony | CDPC305 | LEGS OF POWER TRANSFORMER DO NOT MATCH HOLES ON PCB | The power transformers supplied by NPC (p/n 1-449-954-11) havelegs which do not line up with the holes on the power PCB. -HQ COMMENTS: Tokyo has advised that the transformer can be adapted tothe power board by trimming the two leads that do not match th | ||
| Sony | CDPC205 | LEGS OF POWER TRANSFORMER DO NOT MATCH HOLES ON PCB | The power transformers supplied by NPC (p/n 1-449-954-11) havelegs which do not line up with the holes on the power PCB. -HQ COMMENTS: Tokyo has advised that the transformer can be adapted tothe power board by trimming the two leads that do not match th | ||
| Sony | CDPC201 | LEGS OF POWER TRANSFORMER DO NOT MATCH HOLES ON PCB | The power transformers supplied by NPC (p/n 1-449-954-11) havelegs which do not line up with the holes on the power PCB. -HQ COMMENTS: Tokyo has advised that the transformer can be adapted tothe power board by trimming the two leads that do not match th | ||
| Sony | CDPC35 | LEGS OF POWER TRANSFORMER DO NOT MATCH HOLES ON PCB | The power transformers supplied by NPC (p/n 1-449-954-11) havelegs which do not line up with the holes on the power PCB. -HQ COMMENTS: Tokyo has advised that the transformer can be adapted tothe power board by trimming the two leads that do not match th | ||
| Sony | CCDFX510 | UNIT IS INTERMITTENTLY DEAD OR HAS NO FUNCTIONS/W651 | The unit is intermittently dead after assembly during repair.I found you can flex W573 or W561 to introduce the problem. The cable isbreaking at the end that plugs into the CS-35 board. | ||
| Sony | DTX10 | PART NUMBER FOR LED HOLDER (3-365-233-01) | The service manual shows the plastic bracket which holds theLED D901 as not supplied. -HQ COMMENTS: The part number for the holder is 3-365-233-01. | ||
| Sony | CDX5180 | INTERMITTENT NO OPERATION (RESOLDER Q502 COLLECTOR) | The unit will intermittently not turn on (no functions, nodisplay). Found no LED B+ and no Lamp B+ when the Main board was flexed. | ||
| Sony | ITA4000 | UNIT INTERMITTENTLY DIALS WRONG NUMBER | Unit intermittently dials the wrong number in the tone dialingmode. | ||
| Sony | GV300 | INSTALLING NEW LCD | The horseshoe light is on the screen when LCD is replacedbecause the new LCD's are being stocked without curtains (ref 58). |