Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por:![]() |
---|---|---|---|---|---|
Sony | ICFSW55 | M3 WILL NOT PROGRAM- ALSO CANNOT ERASE MEMORY PRESETS | The memory position M3 will not program properly, also itcannot erase memory positions. | ||
Sony | SLV585HF | MECHANICAL NOISE IN CUE/REV/FF/REW: PULLY 309 X37277821 | A mechanical noise during cue/review and ff/rewind sounds asthough the capstan motor is dragging. | ||
Sony | SLV595HF | NO DRUM OR CAPSTAN MOTOR ROTATION: Q211 MA106 | No drum, or capstan motor rotation. | ||
Sony | SPP170 | SIEZES LINE, BUT NO DIAL TONE ON HANDSET (151) - CHANGE Q-7 | No dial tone, or intermittent dial tone on handset. The unitseizes the line OK though. | ||
Sony | SLV585HF | INTERMITTENT VCR JOG/SHUFFLE CONTROL: CLEAN CN804 MF122 BD | Intermittently, when using jog shuffle to rewind, the unitwill go into fast forward instead. | ||
Sony | CCDFX410 | PIN DESCRIPTIONS FOR W500 (FP425) SL22 BD/USE FX420 S/M | Schmetic shows part # 164211812 for SL-22 board. Board inunit has 164211816, and has 26 pins on W500 (FP425) instead of 24as shown in manual (see page 141). Is there a supplement? -HQ COMMENTS: At this time, there is no supplement for the ServiceManu | ||
Sony | TCDD7 | UNIT DOES NOT APPEAR TO ENTER THE AUTO POWER-OFF MODE | The customer complains that the unit does not enter theauto power-off mode, even after the unit has been in STOP for more than 10minutes. -HQ COMMENTS: In reality, the unit is entering the auto power-off modeafter being in stop for 10 minutes, (display | ||
Sony | CCDFX510 | NO COLOR IN PLAYBACK, CAMERA VIDEO OKAY/LEAKY C310, VA-74 | No playback chroma. The camera video was okay when monitoredat video out. | ||
Sony | KV1380R | VERTICAL ROLL, REPLACE C230 | I received a unit from an authorized servicer with a verticalroll. He already tried a new jungle IC with no change. After verifyingthe problem, I fed video into Video input and found that it workednormally. Looking at the V sync pulse and comparing vi | ||
Sony | KPR53EX35 | LINE IN SCREEN, EXTERNAL PENCIL MARK | Customer complained of a line going through his picture. | ||
Sony | MDPK5 | NO REMOTE OPERATION: L801 ON SB-701 BOARD | No remote operation. | ||
Sony | MDP510 | CHATTER WHEN TRAY MOVES: CLEAN & LUBE LOADING GEAR SHAFT | When the tray is operated in and out, there is an extremelyloud chattering and vibration. | ||
Sony | CDXA55 | DISC UNLOADING INCOMPLETE, MAGAZINE WON'T EJECT | The CD returned to the correct slot, but not completely intothe slot. This was caused by slider #115 not moving. Found stud of theDR gear (ref. #112) broken. | ||
Sony | XVT33 | BACKGROUND IS MAGENTA, NOT WHITE/RESOLDER C-327 | The background on the CRT is magenta due to the loss of G-Ysignal at the input of IC304 on the EN-5 board. | ||
Sony | HCDH1700 | NO DISPLAY - OPEN C922 ON POWER SUPPLY BOARD 1-124-478-11 | The unit did not have any display. It was missing +33 volt DCline to display. |