Dicas Reparação SONY
Modelo - Chassis
Pesquisa: SONY Enviar Dica Resolvida
Resultados 18945
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | TCWR99ES | UNIT DEAD, FOUND OPEN R-703 | Found R-703 (1219-154-11) open. Replaced resistor and unitchecked out fine. After turning unit on and off several times, R-703opened again. Found excessive AC waveform on R-703 when unit was turnedoff. C-701 appeared shorted in circuit but out of cir | ||
| Sony | CDX6020 | EJECTS DISC PREMATURELY (UNIT MOUNTED AT 45 DEGREE ANGLE) | This unit is mounted at an approximately 45 degree angle in aconsole on top of the transmission. Intermittently it will eject or nottake a disc. Are there restrictions on the angle of installation? Wouldheat from the transmission cause the unit to eje | ||
| Sony | CDXR79 | EJECTS DISC PREMATURELY (UNIT MOUNTED AT 45 DEGREE ANGLE) | This unit is mounted at an approximately 45 degree angle in aconsole on top of the transmission. Intermittently it will eject or nottake a disc. Are there restrictions on the angle of installation? Wouldheat from the transmission cause the unit to eje | ||
| Sony | CDXR77 | EJECTS DISC PREMATURELY (UNIT MOUNTED AT 45 DEGREE ANGLE) | This unit is mounted at an approximately 45 degree angle in aconsole on top of the transmission. Intermittently it will eject or nottake a disc. Are there restrictions on the angle of installation? Wouldheat from the transmission cause the unit to eje | ||
| Sony | CDX7580 | EJECTS DISC PREMATURELY (UNIT MOUNTED AT 45 DEGREE ANGLE) | This unit is mounted at an approximately 45 degree angle in aconsole on top of the transmission. Intermittently it will eject or nottake a disc. Are there restrictions on the angle of installation? Wouldheat from the transmission cause the unit to eje | ||
| Sony | CDX7560 | EJECTS DISC PREMATURELY (UNIT MOUNTED AT 45 DEGREE ANGLE) | This unit is mounted at an approximately 45 degree angle in aconsole on top of the transmission. Intermittently it will eject or nottake a disc. Are there restrictions on the angle of installation? Wouldheat from the transmission cause the unit to eje | ||
| Sony | CDX7540 | EJECTS DISC PREMATURELY (UNIT MOUNTED AT 45 DEGREE ANGLE) | This unit is mounted at an approximately 45 degree angle in aconsole on top of the transmission. Intermittently it will eject or nottake a disc. Are there restrictions on the angle of installation? Wouldheat from the transmission cause the unit to eje | ||
| Sony | CDX7520 | EJECTS DISC PREMATURELY (UNIT MOUNTED AT 45 DEGREE ANGLE) | This unit is mounted at an approximately 45 degree angle in aconsole on top of the transmission. Intermittently it will eject or nottake a disc. Are there restrictions on the angle of installation? Wouldheat from the transmission cause the unit to eje | ||
| Sony | CDX5040 | EJECTS DISC PREMATURELY (UNIT MOUNTED AT 45 DEGREE ANGLE) | This unit is mounted at an approximately 45 degree angle in aconsole on top of the transmission. Intermittently it will eject or nottake a disc. Are there restrictions on the angle of installation? Wouldheat from the transmission cause the unit to eje | ||
| Sony | XRU220 | NO AUDIO, OTHER FUNCTIONS O.K. (Q-108 DEFECTIVE) | Unit would power up, display would be on but no audio. | ||
| Sony | CDPC215 | VARIOUS PROBLEMS (RESET NOT WORKING) FLEX CABLE REF. 101 BAD | This unit would manifest a variety of odd problems, includingno play. Noticed that RESET on IC-202 was not going to 0V as required.It stayed at around 3V. Found a break in the ground lead of flexconnector between Main and BD board. This robbed the BD | ||
| Sony | CDPC211 | VARIOUS PROBLEMS (RESET NOT WORKING) FLEX CABLE REF. 101 BAD | This unit would manifest a variety of odd problems, includingno play. Noticed that RESET on IC-202 was not going to 0V as required.It stayed at around 3V. Found a break in the ground lead of flexconnector between Main and BD board. This robbed the BD | ||
| Sony | ICF2011 | LOW SENSITIVITY ON AM AND SHORT WAVE - RESOLDER VR-1 | Low sensitivity on Short Wave and AM. Found cold solder jointon VR-1 pot, the AM RF Gain Control. | ||
| Sony | ICF2010 | COMPATIBILITY PROBLEM IC-504 | The IC-504 is a surface mount IC type. The part number is8-759-240-13. The computer substitutes to part number 8-759-205-76, whichis a dip type IC. Physical size is not compatible. -HQ COMMENTS: KCP corrected the sub. 8-759-240-13 now subs correctly t | ||
| Sony | CDPC221 | NEWER UNITS HAVE DIFFERENT LOADING GEAR SCREW, 7-682-661-09 | Newer production units have a different screw for securing theA loading gear (ref. 112). The original screw is a step screw whichserves as the shaft for the gear the newer units have a machine screwwhich secures the gear to a brass post which is secured |