Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por:![]() |
---|---|---|---|---|---|
Sony | CDPC322M | DISC DRAWER DOES NOT CLOSE | Drawer would not close. Disc table would rotate. | ||
Sony | CDPC425 | DISC DRAWER DOES NOT CLOSE | Drawer would not close. Disc table would rotate. | ||
Sony | CDPC515 | DISC DRAWER DOES NOT CLOSE | Drawer would not close. Disc table would rotate. | ||
Sony | CDPC625 | DISC DRAWER DOES NOT CLOSE | Drawer would not close. Disc table would rotate. | ||
Sony | CDPC525 | DISC DRAWER DOES NOT CLOSE | Drawer would not close. Disc table would rotate. | ||
Sony | CDPC725 | DISC DRAWER DOES NOT CLOSE | Drawer would not close. Disc table would rotate. | ||
Sony | CDPC615 | DISC DRAWER DOES NOT CLOSE | Drawer would not close. Disc table would rotate. | ||
Sony | CDPC67ES | DISC DRAWER DOES NOT CLOSE | Drawer would not close. Disc table would rotate. | ||
Sony | CDPC211 | DISC DRAWER DOES NOT CLOSE | Drawer would not close. Disc table would rotate. | ||
Sony | CDPC315 | DISC DRAWER DOES NOT CLOSE | Drawer would not close. Disc table would rotate. | ||
Sony | CDPC215 | DISC DRAWER DOES NOT CLOSE | Drawer would not close. Disc table would rotate. | ||
Sony | STRAV1070X | HIFI S/B NO. 320 - INVALID PART NUMBER FOR R-975 | Service bulletin NO. HFP0320 states replace open R-975 with1/2 watt 220 Ohm resistor part number 1-214-848-00. This part is nolonger available. | ||
Sony | SPP75 | NO HANDSET TRANSMIT | Handset was not putting out any transmit signal. L-553 waspopped through the board and not allowing for oscillation. | ||
Sony | SPP75 | UNIT WILL NOT DIAL *, 0, OR #, 7, 8, 9 IN TONE | Will not dial *, 0, or # in tone because the trace between pin6 of IC-351 and pin 20 of IC-201 is open (under IC-351). Will not dial 7,8 or 9 in tone because the trace between pin 3 of IC-351 and pin 19 ofIC-201 is open (under IC-351). Open traces appe | ||
Sony | TAE1000ESD | CRACK ON ANALOG BOARD | Hair-line crack develops in area around mounting hole next toR902. This is a high-end product. I believe the (Design Group) needsextra effort with future products. This unit was purchased on January 11and it was received at the SSC on January 18th. |