Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por:![]() |
---|---|---|---|---|---|
Sony | CFD20 | PLASTIC CD HOLDER BREAKS | Plastic CD holder breaks at screw lobe near spindle motor. Isuspect that the cause is there is too much weight for 1 screw lobe tohold. I suggest modifying the CD Holder, ref 103 by adding ribbed supportson the spindle motor end of the holder. -HQ COMME | ||
Sony | CDPC900 | WON'T READ TOC AND CD IS EJECTED BACK INTO MAGAZINE | CD would load, spindle would move in counter clockwise direc-tion. CD would be ejected into magazine. Noticed pin 44, IC-201 was highand pin was 45 low. | ||
Sony | BM540 | INTERMITTENT DICT/LISTEN, REARRANGE C-117 | Intermittently would not Reocrd or Playback audio. InPlayback or Listen mode, could press on lower cabinet assembly (23) andaudio would be muted. Found position of C-117 to be raised up at one endat the junction of C-116 +. This would short onto lower | ||
Sony | MZ2P | UNUSUAL SOUNDING AUDIO CAUSED BY DEFECTIVE FILTER LF-304 | Audio from line out sounded strange, as if the left channelwas comming out of both speakers. | ||
Sony | CFD760 | HIGH PART CONSUMPTION | This part is highly consumed. Part is failing prematurelyeven after just a small amount of use. -HQ COMMENTS: Also applies to model CFD-750 and CFS-W304. Tokyo hasbeen informed. Your samples have been sent to Tokyo for evaluation.Tokyo has evaluated | ||
Sony | CFD750 | HIGH PART CONSUMPTION | This part is highly consumed. Part is failing prematurelyeven after just a small amount of use. -HQ COMMENTS: Also applies to model CFD-760 and CFS-W304. Tokyo hasbeen informed. Your samples have been sent to Tokyo for evaluation.Tokyo has evaluated | ||
Sony | ITA550 | NO OGM ONTO PHONE LINE | No OGM onto the phone line. | ||
Sony | TAAX295 | INTERMITTENT POWER ON/OFF | The National Account Dealer claims to have repaired three (3)units that have turned On/Off by itself or have had clicking sounds fromthe relay. They resoldered all the grounds and replaced some ICs. Theunits returned until they found C-926 was not sold | ||
Sony | KV27EXR25 | WIDTH PULSATES, LEAKY Q-611 ON "G" BOARD | Width would pulsate. B+ would change from about 70V to 135V.Found Q-611 was leaky E to C. -HQ COMMENTS: This will be of help for other people. Thanks. | ||
Sony | CDPC225 | LEGS TOO SHORT ON REPLACEMENT DISPLAY | Legs are too short to reach through the board. -HQ COMMENTS: We have asked NPC to investigate. We will let you knowwhat they find out. -UPDATE: NPC's stock has been checked and corrected. Please re-orderthe part. | ||
Sony | CCDTR71 | EXTENSION CORD FOR "AU-135" BOARD IS INCORRECT/J6082189A | Servicer claims extension cord does not have the rightconnectors to match board. -HQ COMMENTS: Please use J-6082-189-A for this Extender. Please seeservice Bulletin CSV-3 #306 (6/25/93). | ||
Sony | TCFX170 | BAD MOTORS | Customer sent four TC-FX170's in for repair. All had badspots on motor. Also pertains to serial numbers 8814792, 8802009 and8801941. I've seen this at least five other times. | ||
Sony | CCDTR81 | DEFECTIVE CCD IMAGER | Spot in CCD imager. Can be seen against a white background. | ||
Sony | CCDFX410 | CAPSTAN OVERSPEEDING | Capstan overspeeds. Mechanism will not operate. Apparentloss of F.G. | ||
Sony | CDPC75ES | AUDIO MUTES AFTER UNIT WARMS UP |