Dicas Reparação SONY
Modelo - Chassis
Pesquisa: SONY Enviar Dica Resolvida
Resultados 18945
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | TL7 | PART NUMBER OF PAD, EAR | The part number for the ear pad is not listed in the servicemanual. | ||
| Sony | KPR46DX10 | NO PART NUMBER FOR BRACKET, THIS IS NOT A REPLACEMENT PART | Bracket for door is not listed in parts list. Can you locatepart at VTM or from Tokyo and expedite delivery. -HQ COMMENTS: We were able to straighten out the bent bracket. Thisbracket is not available normaly as a replacement part. | ||
| Sony | KV25XBR | SET SHUTS DOWN - WHEN ITS ON HORIZONTAL WIDTH IS PULLED IN | Set shuts down upon turn on but if you turn it on a number oftimes, it will turn on but horizontal width is pulled in approximately 1/4to 1/2 inch on each side of the picture. | ||
| Sony | TCM600 | PLAY BUTTON LABELED INCORRECT IN SERVICE MANUAL | The Play Button located on page 19 of the Service Manual(Location A-4) is labeled Button, REW. It is the larger of the threebuttons in that location and connects to the Lever, FWD part number3-557-514-00. | ||
| Sony | KV32XBR65 | HORIZONTAL CENTERING PROCEDURE MISSING FROM SM, SEE SB 102 | The horizontal centering adjustmnet on page 30 of the servicemanual omits the fact that a horizontal centering tap exists as shown onpage 36, the F board. If the remote commander adjustment is made withthe tap in the wrong place, some sets will exhibit | ||
| Sony | KV32XBR15 | HORIZONTAL CENTERING: SERVICE MANUAL PROCEDURE, SEE SB # 102 | The horizontal centering adjustment on page 30 of the servicemanual omits the fact that a horizontal centering tap exists as shown onpage 36, the F board. If the remote commander adjustment is made withthe tap in the wrong place, some sets will exhibit | ||
| Sony | KV32HSR10 | HORIZONTAL CENTERING: SERVICE MANUAL PROCEDURE, SEE TVP0102 | The horizontal centering adjustment on page 30 of the servicemanual omits the fact that a horizontal centering tap exists as shown onpage 36, the F board. If the remote commander adjustment is made withthe tap in the wrong place, some sets will exhibit | ||
| Sony | KV32XBR10 | HORIZONTAL CENTERING, USES TAP SEE SERVICE BULLETIN # 102 | The Horizontal Centering Adjustment on page 30 of the ServiceManual omits the fact that a Horizontal Centering tap exists as shown onpage 36, the F board. If the remote commander adjustment is made withthe tap in the wrong place, some sets will exhibit | ||
| Sony | KV27HSR10 | HORIZONTAL CENTERING: SERVICE MANUAL PROCEDURE, SEE SB 102 | The horizontal centering adjustment on page 30 of the servicemanual omits the fact that a horizontal centering tap exists as shown onpage 36, the F board. If the remote commander adjustment is made withthe tap in the wrong place, some sets will exhibit | ||
| Sony | KV27XBR60 | HORIZONTAL CENTERING: SERVICE MANUAL PROCEDURE | The horizontal centering adjustment on page 30 of the servicemanual omits the fact that a horizontal centering tap exists as shown onpage 36, the F board. If the remote commander adjustment is made withthe tap in the wrong place, some sets will exhibit | ||
| Sony | KV27XBR10 | HORIZONTAL CENTERING: SERVICE MANUAL PROCEDURE, SEE SB # 102 | The Horizontal Centering adjustment on page 30 of the servicemanual, omits the fact that a Horizontal Centering tap exists as shown onpage 36, the F board. If the remote commander adjustment is made withthe tap in the wrong place, some sets will exhibit | ||
| Sony | KV27FX10 | IFE-450 IF BLOCK, REPLACED WITH P/N 1-464-755-21 | Part number 1-464-755-11 is listed in computer as IFE-450 formodel KV-27HFR with dealer cost of $39.64. Part number 1-464-755-21 islisted in computer as IFE-450 for model KV-27FX10, dealer cost of $28.91.Schematics show them as the same part. Is there | ||
| Sony | CDX7580 | NO POWER | No power, unit reset O.K. | ||
| Sony | CDX7560 | NO POWER | No power, unit reset O.K. | ||
| Sony | KV32XBR15 | INTERMITTENT BLACK BAR IN PICTURE, REPLACED THE CRT | Had a 3-4 inch black band at the top of the CRT. G-1and G-2 measured 86V. Tapping on the neck of the CRT, unit flashed andthen had a black band at the top of CRT and the bottom was all red.Measured G-2 was about 150V. At times G-2 would jump to about |