Dicas Reparação SONY
Modelo - Chassis
Pesquisa: SONY Enviar Dica Resolvida
Resultados 18945
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | CCDF70 | UNIT INOPERATIVE | Unit is inoperative. | ||
| Sony | TAM30 | IN ANSWER MODE TAPE FF TO THE END OF TAPE AND STOPS | Q-205 base to collector is open. With Q-205 defective, thereel pulses from PH-2 are not getting to IC-3, therefore, the reels do notstop until the end of the tape. | ||
| Sony | ITD100 | NO PROGRAM FUNCTION IN ITD'S | J-1 (jumper) is missing from board which disables programswitch (function). | ||
| Sony | ITD150 | NO PROGRAM FUNCTION IN ITD'S | J-1 (jumper) is missing from board which disables programswitch (function). | ||
| Sony | STRAV1010 | NO SURROUND OUTPUT | No surround sound output. The technician replaced, IC-658,same input on pin No. 3 no output on pin No. 6. | ||
| Sony | KV1326R | INTERMITTENT LOSS OF PRESET CHANNELS, REPLACED IC-103 | Unit would intermittently lose all preset channels, exceptchannels 4, 9, and 13. This would happen either right away or afterone or two days. | ||
| Sony | KV27HSR10 | ANODE CONNECTOR MISSING, REPLACE FLYBACK | When replacing the A board, the anode wire from the flybackis missing. Is there a part number for it? -HQ COMMENTS: Please disregard the flyback that might come on the re-placement board. Reinstall either a new flyback or the one from the oldboard. | ||
| Sony | KV27XBR65 | ANODE CONNECTOR MISSING ON NEW "A" BOARDS, SEE SB 108 | When replacing the A board, the anode wire from the flybackis missing. Is there a part number for it? -HQ COMMENTS: Please order part number 1-540-006-32, which is the AnodeCable. This was covered in Service Bulletin number 108. Future A Boardswill co | ||
| Sony | KV27XBR60 | ANODE CONNECTOR MISSING, P/N 1-540-032-32, SB 108 | When replacing the A board, the anode wire from the flybackis missing. Is there a part number for it? -HQ COMMNETS: Please order the Anode Cable, Part Number 1-540-032-32.This has been covered by Service Bulletin number 108. Future boards willbe suppl | ||
| Sony | KV27XBR50 | ANODE CONNECTOR MISSING FROM NEW "A" BOARDS, REPLACE FBT | When replacing the A board, the anode wire from the flybackis missing. Is there a part number for it? -HQ COMMENTS: Please disregard the flyback that might come on the re-placement board. Reinstall either a new flyback or the one from the oldboard. | ||
| Sony | KV27XBR15 | ANODE CONNECTOR P/N MISSING, 1-540-006-32 SEE S/B 108 | When replacing the A board, the anode wire from the flybackis missing. Is there a part number for it? -HQ COMMENTS: Please order part number 1-540-006-32 which is theAnode Cable. This was covered in Service Bulletin number 108. FutureBoards will come w | ||
| Sony | KV27XBR10 | ANODE CONNECTOR MISSING, P/N 1-540-006-32 SEE SB 108 | When replacing the A board, the anode wire from the flybackis missing. Is there a part number for it? -HQ COMMENTS: Please order part number 1-540-006-32 which is the AnodeCable. Future Boards will have the cable with the board. Service Bulletinnumber | ||
| Sony | KV32HSR10 | ANODE CONNECTOR MISSING FROM "A" BOARD, 1-540-006-32 | When replacing the A board, the anode wire from the flybackis missing. Is there a part number for it? -HQ COMMENTS: Please order part number 1-540-006-32 which is the AnodeCable. Future Boards will come with this Cable. | ||
| Sony | KV32XBR70 | ANODE CONNECTOR MISSING, 1-540-006-32 | When replacing the A board, the anode wire from the flybackis missing. Is there a part number for it? -HQ COMMENTS: Please order the Anode Cable, part number 1-540-006-32.Future boards will come with the anode Cable. | ||
| Sony | KV32XBR65 | P/N FOR ANODE CONNECTOR MISSING, 1-540-006-32 | When replacing the A Board, the wire from the flyback ismissing. Is there a part number for it? -HQ COMMENTS: Please order Part Number 1-540-006-32, which isthe Anode Cable. Future boards will come with this Board. |