Dicas Reparação SONY
Modelo - Chassis
Pesquisa: SONY Enviar Dica Resolvida
Resultados 18945
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | NTM1 | FREQUENCY SETTINGS ON NTM-1 | How many receiver frequency settings are there in NusseryMonitor NTM-1? What is the frequency? -HQ COMMENTS: There are two frequency settings for the NTM-1.Switch - A: 49.845 MhzSwitch - B: 49.875 Mhz | ||
| Sony | TAE1000ESD | CANNOT MONITOR WHILE EFFECT RECORDING ON TA-E1000ESD | If effect recording using Tape 2 output and monitoring thesource, an oscillation is heard. This only happens when effect recordingrecording non-processed signal works fine. -HQ COMMENTS: This is normal operation for this unit. It is designedthe same a | ||
| Sony | MPKV11 | V99 DOES NOT GO IN STRAIGHT | Customer claims that the CCDV99 fits in the MPKV11/1, but doesnot line up perfectly with the wide angle lens in the MPK unit that ismounted to the camera holder. -HQ COMMENTS: We believe that the customer is using the mounting for theCCD-V11 not the CCD | ||
| Sony | KV32CX10 | JAGGED VERTICAL LINES, RESOLDER C-685 "G" BOARD | Vertical lines in the picture were jagged. | ||
| Sony | CCDF50 | NO FUNCTION | Report that two units had no function. | ||
| Sony | SLV70HF | DOES SYNCHRO EDIT ALSO ACT AS AN EDIT SWITCH? | Does the synchro edit button, in addition to providing thesynchro edit, also function as an edit switch and flatten out the videofrequency response? -HQ COMMENTS: No, it does not act as an edit switch. | ||
| Sony | PSLX295 | DUST COVER FOR PSLX295 | There is no part number for a dust cover for this model.Since it is part of a system, no dust cover provided. | ||
| Sony | CCDV11 | CASSETTE EJECTS, BUT NEW CASSETTE CANNOT BE INSERTED | The cassette will eject properly, however, the loading motordoes not reverse the small amount needed to put the mechanism back in theloading/unloading mode after eject. Found cassette lock switch permanent-ly closed. After replacement, the same problem | ||
| Sony | SLV555UC | ICS ON THE POWER BLOCK | Currently IC-201, IC-202, IC-203 and IC-204 of the powerblock are unavailable from KCP. Also, part numbers have not beenassigned to them. -HQ COMMENTS: The part numbers of the ICs are asfollows:IC201 - 180879611IC202 - 180879511IC203 - 180802211IC204 - | ||
| Sony | SLV353UC | ICS ON THE POWER BLOCK | Currently IC-201, IC-202, IC-203 and IC-204 of the powerblock are unavailable from KCP. Also, part numbers have not beenassigned to them. -HQ COMMENTS: The part numbers of the ICs are:IC201 - 180879611IC202 - 180879511IC203 - 180802211IC204 - 874992043 | ||
| Sony | SLV757UC | HEAD GAP SIZE | What is the head gap size of the SLV-757? | ||
| Sony | SLV353UC | HEAD GAP SIZE | What is the head gap size of the SLV-353? | ||
| Sony | CDXA30 | SKIPPING IN COLD WEATHER. | A dealer reported that he has two complaints of these unitsskipping when the temperature is under 25 degrees. Units OK after carand unit operates for a while, or temperature warms up. Have you heardof this? -HQ COMMENTS: The cold weather skipping is d | ||
| Sony | CCDF35 | PLASTIC MOLD ON CHASSIS BROKEN. | A molded piece of plastic that goes into the cassette to holdit firmly was broken. The machine worked o.k., except for rewind tapewould get chewed on top. Reason is, this plastic was broken, and thetape is not held firmly to the chassis. | ||
| Sony | MDP510 | CROSSTALKS APPEARS WITH LD, CD SPINS BUT SHUTS OFF | When I play LD disk, cross talks appears. When I play CDdisk, it spins two or three times, but it shuts off. RF signal distorted. |