Dicas Reparação SONY




Modelo - Chassis


Pesquisa: SONY Enviar Dica Resolvida
Resultados 18945
Pedir dica reparação
MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
SonySTRAV460
REMOTE REPLACEMENT Customer wants replacement for RM-S760 remote. These unitsare no longer available. Is there a replacement for this model? -HQ COMMENTS: The replacement is RM-S520. The part number isA-4372-026-A.
SonySPP50
RESET PCB CHANGE The circuitry that was previously on a separate reset PCB isnow included on the Main PCB. The circuit design appears to be the same. -HQ COMMENTS: Thanks for letting me know about this. I faxed Tokyo andthey will send an updated PCB layout. They told
SonySPPS10
RESET PCB CHANGE The circuitry that was previously on a separate reset PCB isnow included on the Main PCB. The circuit design appears to be the same. -HQ COMMENTS: Thanks for letting me know about this. I faxed Tokyo andthey will send an updated PCB layout. They told
SonySPP50
HANDSET AND BASE DO NOT COMMUNICATE Technician has checked receiver and transmitter circuit inboth handset and base. Both operate correctly. Data can be seen goinginto micro at ID code input pin. Any suggestions? -HQ COMMENTS: Check to make sure handset and base both use the samechanne
SonyKV2680R
INCORRECT P/N IN S/M - NECK COVER, CORRECT P/N 4-334-942-00 Part number in service manual (page 19, Ref. No. 6)9-910-999-51, is incorrect. The same part number 9-910-999-51 is foundin the KV-2680R service manual on page 46, Ref. No. 9 .... the samesolution applies.
SonyFD18A
SERVICE MANUAL IS NOT AVAILABLE Service manual is not available. When will it be released? -HQ COMMENTS: Because this is a tourist model and similar to the FD-18there will not be a service manual issued. Let us know if you would likea copy of our manual.
SonyRMS760
REMOTE REPLACEMENT Customer wants replacement for RM-S760 remote. These unitsare no longer available. Is there a replacement for this model? -HQ COMMENTS: The replacement is RM-S520. The part number isA-4372-026-A.
SonySL2400
PINCH ROLLER ASSEMBLY X-3669-307-0 substitutes A-6759-344-A will not physically fit. -HQ COMMENTS: The spring must be replaced with the pinch roller. Theoriginal spring is larger and will not allow the replacement pinch rollerto fit properly.
SonyLCR200
AUTOFOCUS DOES NOT WORK WHEN USING WATER-RESISTANT HOUSING When using LCR-200, water-resistant housing, the autofocusdoes not work properly. -HQ COMMENTS: Autofocus should not work with this housing. Housing istoo short for V11 try LCR-V11.
SonySLV70HF
PART NUMBER FOR FRONT LOADING ASSEMBLY Is there a part number for the comlete front loading assemblyfor the SL-V70HF? -HQ COMMENTS: No, the complete front loading assembly will not be avail-able as a repair part.
SonyEDV9500
DOES EDV-9500 RECORD CTL IN VIDEO INSERT Does the EDV-9500 record new CTL while doing a video insert? -HQ COMMENTS: Yes, it does
SonyCDPC50
PART NUMBER FOR REAR FOOT - REFERENCE NUMBER 35 The original part number (X-4922-505-1) for the Rear Foot(reference No. 35) gets substituted to part number X-4922-508-1. Thisfoot is too large in size. It is the size of the front feet of the unit.We need the correct part number. -HQ COMMENTS: The re
SonyKV2782R
INCORRECT PART NUMBER IN SERVICE MANUAL Part number in service manual (page 19, Ref. No. 6)9-910-999-51, is incorrect. The same part number 9-910-999-51 is foundin the KV-2680R service manual on page 46, Ref. No. 9 .... the samesolution applies.
SonySPP60
NO PART NUMBER FOR SPEED DIAL LABEL There is no part number in the service manual for the speeddial label on the handset. -HQ COMMENTS: Faxed Tokyo. Their response was that this will not be asupplied part. They suggested that the customer make it themselves. Wewill suggest to Tokyo that
SonySPP100
REPLACEMENT MICROPHONE IS TOO SMALL The original part number (8-814-186-00) substitutes to a newpart number (1-542-092-11). The replacement microphone is too small. Isthis a correct substitute? -HQ COMMENTS: I have contacted Tokyo with this question.11/20: The part number no longer subs


Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads