| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Samsung | CZ-21D83NS | Double picture or raster shifted | Check R414 15K | ||
| SAMSUNG | 793V | Liga após 30 segundos desliga | TR 7461 | ||
| SAMSUNG | 793V | Led pisca, não oscila | R626 10k aberto | ||
| Samsung | Z68 | top foldover | TDA8350 field/EW output chip IC301 | ||
| Samsung | Z68 | Dead | Audio o/p chip IC603 TDA2616A s/c | ||
| Samsung | WS32W8VDEX | No G & flaring or R/B similarly affected | Replace R508, R503 or R513 82k. | ||
| Samsung | WI28W6VN | Dead | replace processor chip SAA5553PS/M3/0069 probably caused by dry joint on chopperTX | ||
| Samsung | WI28W6VD SCT53A | Reverts to st/by with strange noise from psu aft few mins | DZ808 7v5 zener pt no 0403-000562 | ||
| Samsung | WI28W6VD S51A | Service mode entering | press the following keys on the remote. standby>display>menu>mute>power on option bytes 1. zoom mode: wide/normal/zoom 2. audio mode: nicam stereo 3. one chip: TDA8844 4. led option: normal 5. language: west eng/ger/dut/spa/ita/swe 6. system: CI 7. ats option: on 8. field pol: field pos having set the option bytes , press menu key and reset message should appear on the screen. | ||
| Samsung | WI28W6VD S51A | No sound, incorrect width & height | Replaced Eeprom IC902 and reprogram | ||
| Samsung | WI28W6VD | To enter service mode - method 2 | Switch TV on. Then on the remote control press standby, picture standard, help, sleep, and standby again. | ||
| Samsung | WI28W6VD | To enter service mode - method 2 | Switch TV on. Then on the remote control press standby, picture standard, help, sleep, and standby again. | ||
| Samsung | WI28W6VD | To enter service mode - method 1 | Switch TV on. Then on the Remote control press standby, display, menu, mute, and standby again. | ||
| Samsung | WI28W6VD | No sound | after entering the service menu to go into the sound menu and for this particular model set sound option to DOLBY then in system menu select CI for the UK, then press menu again and then press reset, this option stores the settings. | ||
| Samsung | W124W6VN | Brightness varies | A1 pot on LOPTx - replacement LOPTx only cure |