Dicas Reparação SONY




Modelo - Chassis


Pesquisa: SONY Enviar Dica Resolvida
Resultados 18945
Pedir dica reparação
MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
SonyAE1C
Col flickers to black & whiteLoss of 5v supply on board B - cct prot to 5v supply o/c
SonyAE1C
Blank rasterQ305 DTA144EK sm on col dec board B
SonyAE1C
BLANK RASTERQ305 DTA144EK ON DECODER BOARD B
SonyAE1C
4 flashes on front LED then nothingReplaced C617 100ufd and C617 220ufd also attend to dry joints on the various regulator IC's
SonyAE-1B KVX2932U
frame foldover at the topC531 1000uf 50V
SonyAE1B KVX2532U
Int Txt & Lum (when ae plug wiggled)Dry joints IC pins on Txt board
SonyAE1B KVX2532U
Audio LH chan int goes to max with crackleTDA6200 on Audio J panel sus. As this chip is expensive, commoned both o/p to good chan
SonyAE-1B KVX2132U
reduced heightR802 0.47R
SonyAE1B KVX2132U
Lines over bright parts of pic & rollingQ598 in video amp circuit faulty, C592 100µ was the cause.
SonyAE1B KV2932U
Line tearing, no sync, vert roll, and colour flickering on/off When link JW105 (cut txt) adjacent to txt board skts on main pcb was linked, fault cleared. IC2 (SAA5231) Vid t/txt processor Ic on the "V" T/txt board was found to be the cause
SonyAE1B
Over bright pic with fb linesD802 RGP10GPKG23 leaky & R805 1R2 hi res
SonyAE-1B
Int picwhen off turning up A1 gives pic with no B - B o/p tr Q709 dry joint
SonyAE-1B
bottom foldover/top stretchC531 680µ 25v, C532 100µ 50v
SonyAE1B
St/by onlyDry joints audio o/p chip IC261 blew chip TDA2050 then destroyed D613/614 (-19v rects)
SonyAE1B
POOR FIELD LINC531 680mfd


Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads