Dicas Reparação SONY
Modelo - Chassis
Pesquisa: SONY Enviar Dica Resolvida
Resultados 18945
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | CDXT62 | MAGAZINE JAMS, HEAD UNIT DISPLAYS " NO MAGAZINE" | The magazine inside a CDX-T62 will become stuck. The head unitwill display No Magazine. The Eject Lever ref #124 is becoming bent. | ||
| Sony | CDXC490 | NO HIGH OR LOW LEVEL AUDIO OUTPUT ON BOTH CD & RADIO | Unit's output IC was defective. After changing output ICthere was no high or low level audio from both CD & Radio. This was dueto the unit being tested with the MCB outside of the frame assembly.Once unit was put back together and with back plate on, no | ||
| Sony | CDXC410 | OUTPUT ONLY EXISTS ON ONE CHANNEL | The audio output only exists on one channel. Theproblem MAY be related to IC301 | ||
| Sony | CDX65 | ERASING ALL DISC TITLES AT ONCE (CUSTOM FILE) | The CD changer may not display NO DATA after servicebulletin #330 has been executed. | ||
| Sony | CDX5490 | THE DISPLAY PANEL IS MISSING SEGMENTS | The LCD Display is scrambled and appears to be missingsegments. | ||
| Sony | CDX5090 | NO AM/FM OUTPUT | No response from tuner unit. The connections were not loose. | ||
| Sony | CDX5090 | BUTTONS DO NOT WORK | Switch collapsed and customer broke 6 key button trying tothe make unit work. | ||
| Sony | CDX5090 | GREEN BACKLIGHTS OF DISPLAY IS OUT | The green backlight lamps of display are out. | ||
| Sony | CDX5090 | NO POWER | Will not power up. | ||
| Sony | CDX4090 | FM BUTTON LOOSE | The FM buttom (REF#65) is loose and the front panel subassembly (REF#61) was broken. | ||
| Sony | CDX3100 | DISC WOULD NOT LOAD OR EJECT PROPERLY | Unit would not load or unload discs properly. Found rollerassembly had lifted up and popped out of the arm assy.(Ref# 103). | ||
| Sony | CDTR54 | DEAD, BUT UNIT DRAWS .25 AMPS CONSANTLY (FOUND X400 BAD) | Unit appeared dead. However, it was constantly drawing .25amps from an external power supply. This current draw was found to becaused by mode control IC303 always outputting the VTR D-D ON signal, butthere was nothing wrong with IC303 itself. Problem | ||
| Sony | CCDTRV70 | UNIT DEAD (FOUND X501 BAD. BE SURE TO MOUNT NEW ONE RIGHT) | Unit dead. | ||
| Sony | CCDTRV40 | BATTERY LAOCK TAB BROKEN | Battery will not lock on unit. | ||
| Sony | CCDTRV40 | NO EVF PIX (FOUND BAD CONNECTIONS AT SW501 ON SD-18 MCB) | EVF doesn't work, no picture. |