Dicas Reparação TOSHIBA
Modelo - Chassis
Pesquisa: TOSHIBA Enviar Dica Resolvida
Resultados 4731
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Toshiba | 3327DB | No start up - LED only with 61v HT | faulty line output transformer (FAT30620). | ||
| Toshiba | 3327DB | 25v CIRCUIT PROTECT O.C. | CHECK AUDIO IC. | ||
| Toshiba | 32Z13P | Bright down sides, dark down centre with fb lines | Dry joints C902 in A1 decoupling | ||
| Toshiba | 32WD98B/G | Buzzing/resonance from centre spkrs | Fit felt tape to lower mask area pt no 23466494 - see TV Dec 01 for details | ||
| Toshiba | 32WD98B C9SS | Squealing in st/by, when sw on small unlocked or no raster | STR-F6668B chopper chip Q801 pt no 23135008 | ||
| Toshiba | 32WD98B | St/by only | HT present at 125v, eeprom faulty also C872 in 16v supply leaky causing low volts of 8v | ||
| Toshiba | 32MW7DB | when a dark object appears on bright background, overal picture brightness increases, then settles to normal | wrong option codes. Enter design mode and change options BS2, 2BS2, 3BS2, WBS2, NBS2 from 0BH to 07H | ||
| Toshiba | 32MW7DB | very slow channel change, OSD oversized, text problems (intermittent) | fit Toshiba mod kit TSN10467 | ||
| Toshiba | 32MW7DB | service mode/ design mode | press MUTE on R/C once, then press and hold again while pressing MENU on front panel. 'S' appears on top right corner. To switch to design mode hold CALL on R/C while pressing MENU on TV, 'S' on screen should turn to 'D'. | ||
| Toshiba | 32MW7DB | Service mode access | press "Mute" on remote , then press & hold "Mute" on the remote again while pressing the "Menu" button on the TV. | ||
| Toshiba | 32MW7DB | pic blanks off intemittently, green LED flashes | resolder Xtal XF01 on text module | ||
| Toshiba | 32MW7DB | No col - only pattern ; ok on atten signal | TA1259N Q501 | ||
| Toshiba | 32MW7DB | int sound from right channel with clicking noise | cut excess lead from C641 (shorting to nearby tracks) | ||
| Toshiba | 329X7M | Blown smoothing cap on main power board | due to excess volts 10µ 100v on auto volt pcb | ||
| Toshiba | 2987DB | Service mode entering | Press "Mute" on remote , then press & hold "Mute" on the remote again while pressing the "Menu" button on the TV |