Dicas Reparação PANASONIC
Modelo - Chassis
Pesquisa: PANASONIC Enviar Dica Resolvida
Resultados 2640
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Panasonic | Alpha 2 | Loss of sync, screen blank then shuts down with squeal after heated | Check IC501 TDA2579A with freezer - if it cures the fault then chip is sus | ||
| Panasonic | Alpha 2 | Loss of line hold int | D/J around LOPT ( T551 ) | ||
| Panasonic | Alpha 2 | LOP TRANSISTOR LEAKY , FUSIBLE FEED RES OC. | RESOLDER LINE DRIVE TRANSFORMER PINS | ||
| Panasonic | Alpha 2 | LINE OP TRANSISTOR SC | RESOLDER LINE DRIVER TX | ||
| Panasonic | Alpha 2 | LINE OP TR SC R567 OC D854 SC | IC801 STR54041M | ||
| Panasonic | Alpha 2 | Line down rh side of screen | C858 1000µ 25v bad connection to pcb | ||
| Panasonic | Alpha 2 | LEFT HAND SOUND CHAN. DIST. | C2442 CERAMIC ( C2441 FOR RH SIDE ) | ||
| Panasonic | Alpha 2 | INT WHISTLES | DRY JOINTS ON LOPT OVERWINDING | ||
| Panasonic | Alpha 2 | Int pic | Check for dry joints connectorr B4 (at front of chassis under crt rim) | ||
| Panasonic | Alpha 2 | Int or weak colour | DL601 Chroma Delay line | ||
| Panasonic | Alpha 2 | INT NON START | R854 ( 0.47 ) CHANGE TO 0.33 PT. NO. ERQ1CKTR33S | ||
| Panasonic | Alpha 2 | Int mains fuse F801 blowing | Mains smoother cap C807 100µ 400v | ||
| Panasonic | Alpha 2 | INT LOSS LINE HOLD | LOPT DRY JOINTED | ||
| Panasonic | Alpha 2 | Int flashing with speckles & going off | Check crt fixing bolts to aquadag | ||
| Panasonic | Alpha 2 | INT FLASHING AND GOING OFF | CHECK DAG EARTHING AND FIXING BOLTS ( REMOVE Q802 TO PREVENT SET SWITCHING OFF ) |