Dicas Reparação SAMSUNG
Modelo - Chassis
Pesquisa: SAMSUNG Enviar Dica Resolvida
Resultados 3850
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Samsung | CI338 | Dead. | R413 ( 1k ) , BU508. | ||
| Samsung | CI3373Z SCT11B/D | Service mode access | Stby/P.STD/HELP/SLEEP/POWER ON. Controls VOL +/- CHANNEL +/- EXIT with Status,{all on r/c} | ||
| Samsung | CI3373Z | Field coll & poss no sound aft storm | Micro faulty (£40) | ||
| Samsung | CI3373Z | Dead | 3.15A fuse o/c; IC801 SMR40200 s/c; DZ801 R2KN s/c; L801 39mH damaged also HC801 HIS0169B hybrid IC | ||
| Samsung | CI3373 SCT13B | Dead - LED flashes every 2 secs | Dry joint coll LOPTr - not obvious to see | ||
| Samsung | CI3373 | Faint pic | Set to 'mild' on handset - reset to normal | ||
| Samsung | CI3373 | DEAD WITH FUSE BLOWN | CHECK ZD8011 FOR S/C | ||
| Samsung | CI3352XT P68C | Dead with LOPTr s/c | Check 125v HT line before replacing LOPTr Q402 2SD1651 - should be 125v. If higher C852 470µ 16v on psu pri is usually the cause | ||
| Samsung | CI3352AT P68 | Slow to change chan, go into Txt & analogue functs | TX01 27Mhz Xtal | ||
| Samsung | CI3352 P68 | Dead - IC801 SDH209B faulty | When replaced, 125v HT was 170v due to C852 470µ 16v faulty | ||
| Samsung | CI3351X | Will not tune in. | DZ824 ( 33v ) leaky , R822 ( 15k , 2W ) o/c. | ||
| Samsung | CI3351X | Stuck in standby. | RD201 ( 5.6v zener ) leaky , IC802 ( MC7808 ) s/c. | ||
| Samsung | CI3351X | St/by only | RD201 5v6 zener leaky; IC802 MC7808 s/c | ||
| Samsung | CI3351X | No tuning | DZ824 33v zener leaky; R822 15k 2w o/c | ||
| Samsung | CI3351X | No sound or raster - standby LED on. | D402 ( KF105 ) s/c , R826 ( 1R ) o/c , C908 ( 1u f , 250v ) on CRT base o/c. |