Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por:![]() |
---|---|---|---|---|---|
Sharp | CS chassis | Dead - No volts at Q701 drain | Tech Bulletin CTV970201 Feb 97 | ||
Sharp | CS chassis | Dead - NICAM LED on or flashing | Check D609/610 or IC201 | ||
Sharp | CS chassis | Blank raster & fback lines when heated | Tech Bulletin CTV970204 Feb 97 | ||
Sharp | CS chassis | Blank raster - no scastle pulse | Check D602 | ||
Sharp | CS chassis | Audio whistle | Damaged print feeding 40v to R368 | ||
Sharp | CS chassis | Accessing service mode | press vol down & ch. up when powering up then store withstandby button. | ||
Sharp | CS 66CS-03H | Field cramp at top | C512 22µ 50v | ||
Sharp | CS 59CS05H | Dead | IC201 TDA8375A IF/vid chip faulty | ||
Sharp | CS 59/66CS03H | trips, no pic or sound, but bright light on top of screen with random colours | Q707 BC338 o/c in "all time" 5V supply | ||
Sharp | CS 59/66CS03H | stuck in stby | Q704 BC338 o/s | ||
Sharp | CS 59/66CS03H | sound Ok, no pic. Flyback lines visible if A1 turned up. | R640 180R fusible s/c (RRXZ227BMZZ) | ||
Sharp | CS 59/66CS03H | slow to come on | C712 220uF 25V | ||
Sharp | CS 59/66CS03H | slow start from cold, NICAM LED is on | C714 1000uF 10V 105degree | ||
Sharp | CS 59/66CS03H | poor focus (looks like CRT faulty) | R618 22k gone high | ||
Sharp | CS 59/66CS03H | no teletext | no video on pin 10 IC401 due to Q451 2SA1037 and Q901 2SC2412 leaky. |