Dicas Reparação SONY
Modelo - Chassis
Pesquisa: SONY Enviar Dica Resolvida
Resultados 18940
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | CCDV1 | NO LED DISPLAY | No led display. | ||
| Sony | CCDV110 | NO RF PICTURE | Picture in viewfinder was good but no picture using RFadaptor. | ||
| Sony | APM007AV | NEED PART NUMBER | Need part number of switch board on page 2. -HQ COMMENTS: The amp board includes the SW board. Please order1-613-776-00 from KCP. | ||
| Sony | D7 | OPTICAL PICK-UP REPLACEMENT | After replacing optical ass'y, unit not functional or veryintermittent. | ||
| Sony | KV2680R | INTERMITTENT AND WEAK COLOR, REPLACE IC-201 | At first, the color appeared slightly weak when compared withanother color TV. Gradually, over a period of several weeks, the colorwould come and go like it was having trouble locking on to the station. | ||
| Sony | WMF50 | BATTERY LID PART NUMBER MISSING | Battery lid part number not listed in service manual. Wasadvised by Tech. Dept. that the part number for the battery lid isX-3330-416-1. | ||
| Sony | HMK3030 | PINCH ROLLER PART NUMBER WRONG | The part number for the pinch roller in the HMK-3030 is wrong.When you order the pinch roller part number, you get the mechanicalchassis. In the manual, the mechanical chassis and pinch roller are thesame part number (X-3573-102-0), and this part number | ||
| Sony | CCDV8AFU | NO AUTO FOCUS | No auto focus because of open infra-red emitter diode. | ||
| Sony | CCDV8AFU | HAIRLINE CRACKS IN PLASTIC NEAR SCREW HOLES | Hairline cracks in plastic near screw holes. These cracksoccur immediately upon installation of handle to base. | ||
| Sony | SLHF900 | HEAD CLOGGING | When using high grade tape heads clog in just a matter ofhours following cleaning. Three samples: this machine and two others,all are original filled heads. | ||
| Sony | KV2782R | SET LOCK ON ONE CHANNEL, REINSTALL FRONT PANEL | Set was locked to one channel and AUX was being displayed.Found AUX/ANT switch closed. By removing the control panel, problemdisappeared. This is the third set. I have seen with this problem andby only removing the control panel, the problem cures its | ||
| Sony | TT2005 | CORRECT PART # FOR TT-1 PCB | Part # in S/M is nowhere to be found on fische or in computer. -HQ COMMENTS: The part number (A-6721-101-B) is now in the system.Please order it through KCP so that they may order from Tokyo. Deliveryshould take about 2 weeks. | ||
| Sony | KV1370 | MISSING REF NUMBER | Supplement #1 R255 designation omitted from schematic.Voltages around Q251, Q252 missing. Similar situation with KV-1325,KV-1326, KV-1365, KV-1367 and KV-1396. -HQ COMMENTS: We will inform Tokyo of the omission of the resistor Ref.Number. | ||
| Sony | PSLX520 | INCORRECT PART NUMBER | Incorrect P/N : A-4630-148-0 Correct P/N : X-4887-404-0 -HQ COMMENTS: We have issued a S/B. | ||
| Sony | SL250 | TERMINAL 1 AND 3 ON RD-22 BOARD CORRECTION | When you order PC101 P/N 8-719-939-28, you get SPI 214 ACwhich does work in circuit. Now the board itself (RD-22) when wired thesame way as the schematic. -HQ COMMENTS: The schematic diagram of RD-22 board is wrong. The boardterminal numbers 1 and 3 s |